Hi,
I need help in from aplicate Dying Gasp on MC 7430 and EM 7430, want to know:
Where to specific phone number to be send sms?
The sintaxe is AT!CUSTOM=“DGENABLE”, 1. But, for which number will be send?
Can anyone help me?
Thank you.
how about this?
at!entercnd=“A710”
OK
at!dgsmsdest=?
!DGSMSDEST: <phone_num>
<phone_num>: Phone number in ASCII string. Enclosed by double quotes. Max 20 characters
OK
at!dgsmscontent?
SMS Content: None
OK
at!dgsmscontent=?
!DGSMSCONTENT: <sms_content>
<sms_content>: SMS content in ASCII string. Enclosed by double quotes. Max 160 characters
OK
ati3
Manufacturer: Sierra Wireless, Incorporated
Model: MC7430
Revision: SWI9X30C_02.30.03.00 r7804 CARMD-EV-FRMWR2 2018/07/25 01:10:04
MEID: 35907406009754
IMEI: 359074060097542
IMEI SV: 17
FSN: LU626300170410
+GCAP: +CGSM
OK
Thank you, sending sms worked.
I would like to ask for more help, if possible. Would dying gasp work in a sudden power outage? And what would DGENABLE’s “send Detach” option be?
Have you tried this in sudden power dettach?
The only option to set is in AT!CUSTOM as stated in AT command guide.
Yes, i did. But when I remove the electricity, I don’t receive the SMS.
I used the option below:
- AT! CUSTOM = “DGENABLE”, 3.
then how did you test previously for “sending sms worked”?
The tests were performed on a cisco 899g-lte router, where the radio is the MC 7430, so when the shutdown is via the command line i receive the sms, however when I unplug the router from the outlet, this does not happen.
the SMS will be sent when de-assert the W_DISABLE PIN