Hello,
I am trying to establish End to End TCP Connection using only LTE.
The module is set to connect only to LTE network.
AT Commands Interface Guide.pdf does have only GPRS connection example.
Can anyone help me with this case? What type of AT commands should I use?
Thanks,
Michal
Hi Michal,
You can still use the same KTCP example when using LTE.
Hi,
but should I set LTE parameters (APN, login, password)?
I can not find AT command similar to: AT+KCNXCFG=1,“GPRS”,“APN”,“log”,“password”
Is it possible that you can show me an example?
Michal
Okay I think I get it.
Using the same sequence of commands let you establish internet connection on LTE network. The gsm module ignore “GPRS” label in command: AT+KCNXCFG.
Is my assumption correct?
Michal
Hi Michal,
+CREG: 1,“FFFF”,“06ABE402”,7
+CGREG: 1,“FFFF”,“06ABE402”,7,“00”
+CEREG: 1,“252A”,“06ABE402”,7
+SIM: 1
+KSUP: 0
+PBREADY
ATI3
RHL769x.2.27.183100.201808171133.x7120m_2
OK
AT+KSRAT?
+KSRAT: 5 // LTE ONLY
OK
AT+CGDCONT?
+CGDCONT: 1,“IP”,“3gnet”,“10.160.157.249”,0,0,0,0,0,0
OK
AT+KCNXCFG=2,“GPRS”,“3gnet”,“login”,“password” //=2
OK
AT+KCNXUP=2 //=2
OK
+KCNX_IND: 2,4,1
+KCNX_IND: 2,1,0
AT+CGDCONT?
+CGDCONT: 1,“IP”,“3gnet”,“10.160.157.249”,0,0,0,0,0,0
+CGDCONT: 2,“IP”,“3gnet”,“10.169.219.129”,0,0,0,0,0,0
OK
AT+KTCPCFG=2,0,“116.XX.XXX.XX”,5045 //=2
+KTCPCFG: 1
OK
AT+KTCPCNX=1
OK
+KTCP_IND: 1,1
AT+KTCPSND=1,4
CONNECT
//AAAA–EOF–Pattern–
OK
+KTCP_DATA: 1,4
AT+KTCPRCV=1,4
CONNECT
AAAA–EOF–Pattern–
OK
AT+KTCPCLOSE=1,1
OK
AT+KCNXDOWN=2,1 //=2
OK
+KCNX_IND: 2,3
AT+KTCPDEL=1
OK
Ok, thanks 