I have cross compiled gobinet and gobiserial for openwrt and my netgear r7800. I have tested it with a mc7455 and it seems to be working great. I then plug my em7565 into the router and I just get a kernel crash and reboot after it trys to establish a connection. It never makes a connection. Are there different gobi drivers for the mc7455 and em7565 or are they the same?
I’m using QMIdriversS2.35N2.54
Model: EM7565
Revision: SWI9X50C_01.07.02.00 6c91bc jenkins 2018/06/13 23:08:16
Mon Dec 24 06:42:28 2018 kern.info kernel: [ 129.084179] usb 1-1: new high-speed USB device number 6 using xhci-hcd
Mon Dec 24 06:42:29 2018 kern.warn kernel: [ 129.264614] usb 1-1: config 1 has an invalid interface number: 8 but max is 3
Mon Dec 24 06:42:29 2018 kern.warn kernel: [ 129.264662] usb 1-1: config 1 has no interface number 1
Mon Dec 24 06:42:29 2018 kern.info kernel: [ 129.278321] GobiSerial 1-1:1.0: GobiSerial converter detected
Mon Dec 24 06:42:29 2018 kern.info kernel: [ 129.278910] usb 1-1: GobiSerial converter now attached to ttyUSB0
Mon Dec 24 06:42:29 2018 kern.info kernel: [ 129.308845] GobiSerial 1-1:1.2: GobiSerial converter detected
Mon Dec 24 06:42:29 2018 kern.info kernel: [ 129.309171] usb 1-1: GobiSerial converter now attached to ttyUSB1
Mon Dec 24 06:42:29 2018 kern.info kernel: [ 129.341034] GobiSerial 1-1:1.3: GobiSerial converter detected
Mon Dec 24 06:42:29 2018 kern.info kernel: [ 129.341358] usb 1-1: GobiSerial converter now attached to ttyUSB2
Mon Dec 24 06:42:29 2018 kern.info kernel: [ 129.346486] QMAP Disabled
Mon Dec 24 06:42:29 2018 kern.info kernel: [ 129.374469] GobiNet 1-1:1.8 eth2: register ‘GobiNet’ at usb-xhci-hcd.0.auto-1, GobiNet Ethernet Device, 0e:c5:66:b8:60:d7
Mon Dec 24 06:42:29 2018 kern.err kernel: [ 129.376819] GobiNet 1-1:1.8 eth2: kevent 12 may have been dropped
Mon Dec