Hi, I am trying to add a user for SSH in my bitbake layers, but I can’t succeed. The rootfs built on my host machine contains in “/home/” the following : [image] However, after flashing my fx30 with “swiflash”, there is no “/home/sshuser”. How could I make it work ? Best regards, Sami

didn’t you can make it work here? [image] FX30 Yocto : add new user FX30 I tried adding “-m” to my “useradd” command, and it looks like it was the missing part. I am a bit surprised, as “/home/sshuser” was present in the built rootfs.tar.bz on my host machine, but it works…

I thought so, but it seems like I didn’t manage to properly clean the FX30 and the “/home/sshuser” that I had manually created was still there. When I am first doing a “swiflash -m fx30_catm -r” to clean the FX30, and then flash it with the image built, the “home/sshuser” directory is not present.

Does this help to create folder in fs? [image] How to create a folder in the root directory mangOH Yellow Just make a test, I can successfully make a /test folder by rebuilding WP76 R16 yocto source. open the following file…

Thanks for the quick replies. I managed to do the example you gave in the other topic and to create a “/test” directory. However, if I try to install “/home/test”, only “/home/root” is present. [image] Because of the date shown for “/home/root”, I will try removing “/home” from “fstab” file in …

Well, no difference. I will try adding files in “/home/root” to see if they are still present after flashing the FX30.

[image] sami.brugier: I will try adding files in “/home/root” to see if they are still present after flashing the FX30. The added files are not present once the image is flashed.

On my side, if i add some files in /home/root, after flashing yocto.cwe, the files remain there Btw, you can modify init script startlegato to add your command [image] Adding scripts to run at startup Legato Linux distribution (Yocto project) …

Could you please tell me how you added files to “/home/root” ? I just want to see if I am doing something wrong. Thank you again.

i used scp to push file to /home/root actually the /home/root is in userapp partition, i am not sure if you can add file to it in your yocto.cwe That is why i suggest to modify initscript startlegato.sh

Ok, thank you for your answer. Do you know where we could find a list of the different partitions ? I think that in my case, one of the solution would be to create the home directory of my new user at the following path : “/usr/home/sshuser” I’ll try to make it work and I will let you know.

FX30 Yocto add user and SSH authorized keys

IoT Gateways FX30

jyijyi April 8, 2024, 10:14am 2

didn’t you can make it work here?

Topic		Replies	Views
FX30 Yocto : add new user FX30	7	1023	March 27, 2024
Bitbake recipe for adding new user FX30	2	3254	May 21, 2019
Using key pair to ssh into FX30 FX30	21	2165	October 22, 2021
Incomprehensible problem on FX30 FX30	8	1564	January 26, 2018
Adding user via Yocto Image WP Series	0	844	August 31, 2021

FX30 Yocto add user and SSH authorized keys

Related topics