Config EM9293 Tx power

[jyijyi]

does this help?

EM9191 - TX Test Mode Error with WCDMA Technology

Hi Community, I prepare at the moment the Configuration for Approval Measurement. The Example of LTE was running well. But the Example of WCDMA gets an Error: It looks so… at!entercnd=“A710” at!entercnd="A710"OK at!daftmact at!daftmactOK at!daupdateparam=1,2 at!daupdateparam=1,2OK at!darconfig=0,1,2,9400 at!darconfig=0,1,2,9400ERROR at!datxcontrol=0,1,1,-505 at!datxcontrol=0,1,1,-505ERROR Maybe anybody have a idea? The Example was copy by “Customer Production Test Guide” Thanks …

EM9191 - get to full power dissipation via AT-commands

Hello together, I was wondering if there is a way to get towards the 2A supply current for the EM9191 (as stated in the datasheet) using AT-commands. I’m a HW-Guy and don’t want to spend to much effort on building the environment for it. I tried to get there with the Customer Production Test Mode, but tit was not sufficient enough (~0.9A). I would guess that only one antenna was enabled in this mode. Maybe I forgot something there. So far I used these AT-commands: AT!ENTERCND=“A710” AT!DAFT…