Hi
I have tried to insert SD card (kingston 32GB) on mangOH yellow+wp7607, but I can’t find any disk information in the system.
and system hang on (no response) after I send command “fdisk -ul” (as below)
and I tried to pull down the SD_DETECT , but still no SD card was found…
Can someone teach me how to install sd card mangOH?
tks.
jyijyi
February 3, 2021, 3:12am
2
you can check in kernel log and see if there is anything about the SD card:
root@swi-mdm9x28:~# dmesg | grep ‘mmc’
[ 1.072562] sdhci_msm 7864900.sdhci: No vmmc regulator found
[ 1.072576] sdhci_msm 7864900.sdhci: No vqmmc regulator found
[ 1.072941] mmc0: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 32-bit ADMA in legacy mode
[ 1.200555] mmc0: new high speed SDHC card at address e624
[ 1.208729] mmcblk0: mmc0:e624 SU08G 7.40 GiB
[ 1.210479] mmcblk0: p1
root@swi-mdm9x28:~#
I remember not all SD card can be used, you might need to try more other SD card: