Good morning, I am using an FX30 from the Linux console (SSH connection) and I would like to use the ADC1 (pin 5, IO2 of the power cable). The read command always reports the same value regardless of of the power I apply on the PIN5. Command used: $> cat /sys/class/hwmon/hwmon0/device/mpp…

FX30 ADC read from the console

Moderator1 July 14, 2017, 11:48am 2

Hello,
Please contact Sierra Wireless support/ Distributor for this issue.

Thanks & Regards,
Moderator

Topic		Replies	Views
[FX30] ADC usage FX30	3	1325	March 13, 2018
FX30 ADC on IO2 IoT Gateways	2	170	December 27, 2023
FX30 IOs API for legato FX30	35	1563	May 3, 2021
Using ADC on FX30 FX30	4	773	April 3, 2019
[FX30 Cat1] Measure power voltage FX30	4	656	October 8, 2021