Nothing is ever sent or received on the DB9 serial port. I followed manual instructions to enable serial for DB9 RS232 [code]root@fx30s:~# microcom -E /dev/ttyAT AT!MAPUART=17,1 OK AT!MAPUART? !MAPUART: 17,0 OK root@fx30s:~# reboot root@fx30s:~# ./rs485.py /sys/devices/platform/msm_serial_…

FX30S DB9 serial port never sends or receives data from DCE

cchenry March 5, 2018, 7:28pm 7

Hi there,
I apologize, but 8 wire UART with hardware flow control is currently not supported.
BR,
Chris

Topic		Replies	Views
[FX30S] Use serial port with developer studio FX30	7	2843	November 6, 2017
FX30S rs485.py error FX30	5	1126	December 7, 2022
[RESOLVED] FX30 Serial with Java FX30	7	2898	August 25, 2017
Issue with stty config and reception of data in FX30 FX30	6	1279	September 18, 2018
FX30s - RS232 serial port signals FX30	2	886	April 26, 2019