Hi,
For those that have hit this before, here is what I did to solve the issue…
I noticed on the Mangoh forum a post not entirely relating to my issue :-
forum.mangoh.io/t/controlling-wp … roblem/984
I had already for each GPIO I needed applied :-
AT+WIOCFG=<GPIO#>,16,0,0,1,0,0
In the AT Command console.
then within the main console I executed from /sys/class/gpio folder :-
echo <GPIO#> > export
where <GPIO#> is the GPIO number.
Once I applied the above, I can now use the GPIO’s within my API.
I also tested this re-configure is non-volatile.
Thanks.