WP7402 FTM Mode ?

Where cann i find information about the FTM mode , what happened there
The command is
AT!DAFTMACT , put modem into FTM mode in dokument AT command reference guide 4118047 Sepr 2016 rev 2

Hi,

This is a hole in the documentation which I will point out to product management to have corrected. They are the same as the commands in the MC family the command manual (section 5) of which you can find at the link below.

https://source.sierrawireless.com/~/media/support_downloads/airprime/74xx/4117727_airprime_em74xx-mc74xx_at_command_reference_r3.ashx

I have also attached a teraterm script for the MC74 showing some test sequences.

Regards

Matt