[Hilo] How host be signaled when Hilo3G wake up from sleeep?

[Hilo] How is the host signaled when Hilo3G modules wake up from sleep?

Answer: During sleep (STANDBY MODE, Current < 1.7 mA):
When incoming a data/voice call:

  • Then RI signal will be changed to low level (RI=1, active) if you’ve already set <AT+KRIC=3,1>
  • You’ll get URC of “RING” from UART or USB
  • Module will be waked up, you can see CTS be changed to low level (CTS=1, active)

When incoming an SMS:

  • There’s a second pulse on RI signal If you’ve already set <AT+KRIC=3,1>
  • You’ll get URC like <+CMTI: “ME”,5> if you’ve already set <AT+CNMI=2,2,2,1,0>
  • Module will be waked up, you can see CTS be changed to low level (CTS=1, active)