How to complete HL8518 device configuration in airvantage

Hilo, HL6, HL7, HL8 modules

How to complete HL8518 device configuration in airvantage

Postby manojl045 » Tue Nov 21, 2017 5:02 am

i'm trying to add my device in Airvantage i followed the document of airvantage configuration. after giving all details, under monitor-->systems--> communication status showing pending. how to get activate my system and what is the exact functionality of wakeup procedure.and if i give any req like wake up or send at command and subscription goes failed.i am unable to find the solution.please suggest me to solve this issue.
Posts: 4
Joined: Mon Dec 28, 2015 9:49 pm
Has thanked: 0 time
Have thanks: 0 time

Re: How to complete HL8518 device configuration in airvantag

Postby Rex_alex » Wed Nov 22, 2017 9:24 am


Can you double check the below mentioned points has properly done in you HL8518 module:

• Set the APN: AT+WDSS=0,”your-apn”,”apn-login”,”apn-password”
• Check APN : AT+WDSS?
• Subscribe to all indications : AT+WDSI=8191
• Check current indication subscription: AT+WDSI?
• Activate 3 user agreements
• Check user agreements setting
• Initiate a DM session : AT+WDSS=1,1
• Received “starting DM session” indication (+WDSI:4)
• Received indication (+WDSI:6), DM exchange occurred between the module and AirVantage
• Received indication (+WDSI:8), DM session is closed
• Initiate once again a DM session

Note: there is no DM exchange, no (+WDSI:6) indication

Please refer to this document “AirPrime - HL Series - AirVantage Firmware Over-The-Air Guidelines - 2174110 - Rev1.0.pdf” for further more information.
Link :

if you still face an issue , Please contact your Technical support in SWI to provide you the solution.

Thanks and Regards,
User avatar
Posts: 1395
Joined: Thu Jan 01, 1970 12:00 am
Has thanked: 0 time
Have thanks: 84 times

Topic Tags

AirPrime Management Service., HL Series, AirVantage

Return to HL Series

Who is online

Users browsing this forum: No registered users and 1 guest