After GX400 firmware upgrade to 4.4.5.011 OpenSIM I don’t have access to the router from WAN/Cellular interface. I cannot ping the public IP address nor connect to OTA management. From LAN I have access to the router and to remote network. Is there a new configuration that I must add?

No access from WAN/Cellular after upgrading GX400 to 4.4.5

xarxa January 30, 2018, 7:25am 3

Hello,
Yes, I’m using static public IP.

Topic		Replies	Views
GX400 Router, cannot apply changes!	3	308	June 28, 2023
LX40 - unable to access web interface after failed radio firmware update AirLink Routers fw-upgrade	2	566	May 17, 2023
GX400 Firmware upgrade failure AirLink routers	2	1086	February 16, 2016
GX440 and Static IP on VZW AirLink routers	1	1372	December 4, 2013
GX450 running 4.8.0 AirLink routers	1	1115	July 24, 2017