CA in Canada on Bell with RV50x

Hello,

I have recently deployed an RV50x in Canada operating on the Bell network and it seems the CA is flapping from Active to Inactive.

Here is the two different modem debugs:

AT!GSTATUS?
!GSTATUS:
Current Time: 57796Temperature: 31
Reset Counter: 1Mode: ONLINE
System mode: LTE PS state: Attached
LTE band: B4 LTE bw: 15 MHz
LTE Rx chan: 2325LTE Tx chan: 20325
LTE CA state: ACTIVE LTE Scell band:B5
LTE Scell bw:5 MHz LTE Scell chan:2535
EMM state: Registered Normal Service
RRC state: RRC Connected
IMS reg state: No Srv

PCC RxM RSSI: -57RSRP (dBm): -77
PCC RxD RSSI: -60RSRP (dBm): -80
SCC RxM RSSI: -51RSRP (dBm): -71
SCC RxD RSSI: -49RSRP (dBm): -71
Tx Power: 15TAC: 2BD6 (11222)
RSRQ (dB): -6.8Cell ID: 01BC4A00 (29116928)
SINR (dB): 22.4

OK
AT!GSTATUS?
!GSTATUS:
Current Time: 57833Temperature: 31
Reset Counter: 1Mode: ONLINE
System mode: LTE PS state: Attached
LTE band: B4 LTE bw: 15 MHz
LTE Rx chan: 2325LTE Tx chan: 20325
LTE CA state: INACTIVE LTE Scell band:B5
LTE Scell bw:5 MHz LTE Scell chan:2535
EMM state: Registered Normal Service
RRC state: RRC Connected
IMS reg state: No Srv

PCC RxM RSSI: -55RSRP (dBm): -77
PCC RxD RSSI: -58RSRP (dBm): -79
SCC RxM RSSI: -46RSRP (dBm): -71
SCC RxD RSSI: -45RSRP (dBm): -70
Tx Power: 9TAC: 2BD6 (11222)
RSRQ (dB): -6.8Cell ID: 01BC4A00 (29116928)
SINR (dB): 22.4

Is this normal operation or is something not working quite correctly? It is just running the Generic modem firmware.

Any insight would be greatly appreciated!

Thanks!!