SL6087 target firmware upgrade from 7.45 to 7.46

Hi,

I am following the following steps to upgrade the Sl6087 Target firmware via Hyper-Terminal.

1: AT+CFUN=1 OK
2: AT+WDWL OK
3:Go to TRANSFER icon select SEND FILE browse to drive program files Sierra Wireless>Embedded Software>com.wavecom.openat.ide.spm.fw.model.7.46.0.201108091301_7.46.0.201108091301>resources>swift and select dwl.dwl file and press open. Now, in protocol scroll Select 1K Xmodem and press send.

4: Go to TRANSFER icon select SEND FILE browse drive program files Sierra Wireless>Embedded Software>com.wavecom.openat.ide.spm.fw.model.7.46.0.201108091301_7.46.0.201108091301>resources>swift and select R7.46.0_sl6087.dwl file and press open. Now, in protocol scroll Select 1K Xmodem and press send.

5:ati3 to check details shows firmware as 7.46.

Following, the above steps, the Developer Studio, in Status Tab Firmware section Version is shown as 7.45.

I want to know why Firmware Version is not getting updated.

Thanks
Jitendra

Hi Jitendra,

Did you download the w.dwl file after the R7.46.0_sl6087.dwl ?

Regards,
Paruthiv

Hi Paruthiv,

Thanks for you response.
No, I have not downloaded the w.dwl file after the R7.46.0_sl6087.dwl.

Thanks
Jitendra

Hi Jitendra,
Just came across this post, are you able to upgrade the module?

Would you mind to check this thread:
[url][SL6087]Firmware Update]

Thx.
L

thanks a lot :slight_smile: