[SL8092] uart1 speed

SL6087, SL808x, SL809x, SL9090, SL501x, Q2686, Q2687, Q2698, Q26 Elite

[SL8092] uart1 speed

Postby Michael_S » Mon Oct 22, 2012 3:26 pm

Hallo,

I have a question concerning the datarate of the usart1 interface of the SL8092 module.
The datasheet says (section 4.5) that the module supports speeds up to 4 Mbps.
If I ask the module with AT+IPR=?, it answers with
+IPR: (),(300,600,1200,2400,4800,9600,19200,38400,57600,115200,230400)

It seems that it supports a maximum baudrate of only 230400 bps.
How can I get the promised 4 Mbps?

Thanks in advance,
Michael
Michael_S
 
Posts: 2
Joined: Thu Aug 23, 2012 6:52 am
Has thanked: 1 time
Have thanks: 0 time

Re: [SL8092] uart1 speed

Postby tobias » Wed Oct 24, 2012 1:11 pm

I believe you'll have to go through your FAE to get modules that support 4Mbps.

From what I was told previously, it should be possible to unlock up to 921600bps through command somehow, but that 4Mbps support would only be available if configured for that at factory.

For this post the author tobias
has been thanked by :
Michael_S (Wed Oct 24, 2012 2:07 pm)
tobias
 
Posts: 435
Joined: Sun Dec 02, 2007 10:00 am
Has thanked: 3 times
Have thanks: 20 times

Re: [SL8092] uart1 speed

Postby Michael_S » Wed Oct 24, 2012 2:08 pm

Hi Tobias,

thank you for the hint.

In our application we can not use the USB interface, but we need high datarates in the order of Mbit/s. So we looked for a module which supports UART baudrates as high as possible and found this one.
That it doesn't support 4Mbps out of the box as mentioned in the datasheet is highly unpreferable.

Du you know the AT-command to get at least 921600bps?
Michael_S
 
Posts: 2
Joined: Thu Aug 23, 2012 6:52 am
Has thanked: 1 time
Have thanks: 0 time

Re: [SL8092] uart1 speed

Postby tobias » Wed Oct 24, 2012 2:18 pm

I do not know the command to enable higher speeds.
I'm not even certain that it's a regular AT-command.
I can only recommend that you go through your FAE to find out more about this.
tobias
 
Posts: 435
Joined: Sun Dec 02, 2007 10:00 am
Has thanked: 3 times
Have thanks: 20 times

Re: [SL8092] uart1 speed

Postby awneil » Wed Oct 24, 2012 3:50 pm

Fastrack Suprememe wrote:+IPR: (1200,2400,4800,9600,19200,38400,57600,115200,230400,460800,921600),(0,300
,600,1200,2400,4800,9600,19200,38400,57600,115200,230400,460800,921600)

That's a Q26 with 663_09gg.FSU002 1955080 080207 16:01 firmware

Again, you really need to speak to your FAE or Distributor about this
When I say "SiWi", that's short for "Sierra Wireless".
User avatar
awneil
 
Posts: 6641
Joined: Mon Dec 03, 2007 1:18 pm
Location: Basingstoke, UK
Has thanked: 54 times
Have thanks: 88 times


Topic Tags

baud rate, UART, SL8092

Return to Q/SL Series

Who is online

Users browsing this forum: No registered users and 2 guests