Dear All,
Is it possible to make a particular SIM (airtel/idea/ect…) to work only w.r.t one wave com module(Q2687Rd)
I mean:
can i lock Sim number 9xxxxxxx01 to wave com module Q2687RD having IMEI number yyyyyyyyyyyy
Kindly suggest, any means to achieve the above function.
Thanks & Regards,
tomridl
2
Have a look at the following in the AT Command Interface Guide:
AT+WLCK=“PS”…
I’m not sure if it’s exactly what you are looking for, but might be on the right track…
Hi
thanks for your input, i executed as suggested below , but my module got locked and kindly suggest to unlock the same.
For ex: to lock i used below command
AT+WLCK=“PS”,PASSWORD,IMEI NUMBER
kindly suggest the unlock command as my module is not even working with the same sim card ; it is not searching the network (not able to send SMS).
Regards.
tomridl
4
AT+CLCK=“PS”,0,PASSWORD ?
Hi
I tried ; its giving Error-5 as below
AT+CLCK=“PS”,0,12345678
+CME ERROR: 5
Note: 12345678 was my password; Modem is working but not able to resister to the network status LED is continuously glowing.
kindly suggest…
Regards,