After clearing the ERR-Log there is this Response after AT!ERR
AT!ERR=0
OK
AT!ERR
QDSP6 ARM9 (not saved)
What does it mean?
Thanks!
After clearing the ERR-Log there is this Response after AT!ERR
AT!ERR=0
OK
AT!ERR
QDSP6 ARM9 (not saved)
What does it mean?
Thanks!
Hi,
AT!ERR command is used to display logged error conditions that are stored in NVRAM.
AT!ERR returns the log filename and line number in log file for the error
So, when are you getting this error(i.e. AT!ERR QDSP6 ARM9(not saved))? What kind of test is being performed or what is the use case for which detailed diagnostic information is being displayed.
Can you please share the complete DM logs.
Thanks.
I am just guessing here, so I could be wrong about this, but I’ve interpreted the
QDSP6 ARM9 (not saved)
as a header line and not as part of the error list. It seems to be just a classification of errors based on which CPU they occured in. So the above is really an empty error list, and is what you should expect when you reset the list with AT!ERR=0.
Just for reference, this is what my output look like without resetting the list:
at!err
QDSP6 ARM9 (not saved)
00 C4 cmipcall 01964 00 01 hsu_conf_sel_nv 00578
01 FF lte_nas_log 00168 01 01 hsu_conf_sel_nv 00622
02 FF lte_nas_log 00547
03 FF lte_nas_log 00525
04 FF lte_nas_log 00077
05 FF sm_multimode_ha 00069
06 AF ds_3gpp_hdlr 00816
07 FF rfc_mdm9x00_eu_ 01719
08 FF rfc_mdm9x00_eu_ 01744
09 FF rdevmap 02030
10 FF sio 00737
11 FF sio 00519
12 FF rrcllcpcie 18795
13 FF cmsds 01741
14 FF cmsds 01771
15 FF gsdi 07344
16 FF mmgsdiutil 16577
17 93 gsdi_nv 00221
18 93 gsdi_cphs 00693
19 93 ui_base 00725
OK
I believe this makes it more obvious that the first line is a header. (I am not worrying about these messages - just posted for reference).
Bjørn
Shortly after sending the post I had the fear that it could be the headline.
Since I had no error message, it was unfortunately not logically be seen.
Thanks for the help and sorry for the question.
Sam
Rex_Alex,
After enter the AT!ERR command i get a list of codes.
what does these codes mean?
are there any documentation for interprete these lines?
thanks in advance