Hi, I’m working on an Linux embedded system (kernel 2.6.32.9) and I would use MC8092 with GPSD. I succeeded communicate with MC8092 card thanks to minicom, but when I send “AT!GPSSTART=1,255,100,1000,1”, communication shut down after 10 seconds and I did not receive any NMEA frame. I tryed to con…

MC8092 and GPS

jdpayne1969 November 9, 2013, 7:33pm 5

Was a firmware problem.

Topic		Replies	Views
how to use the gps option in MC 8790? MC/EM Series	5	4578	May 14, 2012
Problem AT Commands in Linux MC/EM Series	4	2755	May 19, 2016
MC8705 locking up MC/EM Series	1	757	January 28, 2015
MC7355 MC7304 MC7804 PPP and AT commands MC/EM Series	1	1658	January 20, 2014
[SL8082T] GPS NMEA Data / "Sierra Wireless NMEA Port (UMTS)" Legacy AirPrime modules	5	2845	March 17, 2014