Hello,
I’ve done the same for EM7455 on DELL E7270 running Windows 10 Pro 64 bit where result as below:
FDT version: 1.0.1702.1
Awaiting adapter …
Setting images preference …
Resetting …
Awaiting download port …
Downloading images …
Writing image -
Flashing image
Writing image |
Flashing image /
Enabling selective suspend …
Awaiting adapter …
Checking update status …
Enabling selective suspend …
Firmware image download succeeded.
Final Firmware update succeeded.
Preexisting images information:
Current:
Firmware:
ImageId: 002.021_000
BuildId: 02.24.03.00_GENERIC
Configuration:
ImageId: 002.021_000
BuildId: 02.24.03.00_GENERIC
Final images information:
Current:
Firmware:
ImageId: 002.026_000
BuildId: 02.24.05.06_GENERIC
Configuration:
ImageId: 002.026_000
BuildId: 02.24.05.06_GENERIC
OEM PRI: 9904802 001.001 Generic-Laptop
IMEI: XXXXXXXXXXXXXXX
Total time elapsed: 106891 ms.
Time to switch to boot mode: 14593 ms.
Images downloaded:
Image ID: ??
Build ID: 02.24.05.06?
write time: 4672 ms
additional flash time: 61156 ms
Image ID: 002.026_000
Build ID: 02.24.05.06_GENERIC
write time: 31 ms
additional flash time: 63 ms
Time to reset to application mode: 25187 ms.
Press Enter to continue …
I’m checking through HyperTerm and result as below:
Manufacturer: Sierra Wireless, Incorporated
Model: EM7455
Revision: SWI9X30C_02.24.05.06 r7040 CARMD-EV-FRMWR2 2017/05/19 06:23:09
MEID: XXXXXXXXXXXXXXXX
IMEI: XXXXXXXXXXXXXXXXXXXXX
IMEI SV: 12
FSN: LF618304770110
+GCAP: +CGSM
OK
Does that firmware flashing finished completely ?