APN Settings EM7305

MC73, MC74, EM74, MC809x, MC9090

APN Settings EM7305

Postby cknubel » Wed Jul 12, 2017 12:53 pm

Hello,

I am developing a connection manager app for my company. The hardware is a Getac RX10 with an embetted EM7305 modem.
We had issues with the Apn-settings on the windows network options. Sometimes the Apn settings such as apnuser and password disappear from the windows settings.
So we decided to handle it on our own. I can´t figure out how I can set the apnuser and password.
Currently I communicate with the modem via COM-Port and AT commands.
I checked the documentation and couldn´t find any command to handle the username and password.

Any ideas?
cknubel
 
Posts: 2
Joined: Mon Jun 26, 2017 6:56 am
Has thanked: 0 time
Have thanks: 0 time

Re: APN Settings EM7305

Postby Rex_alex » Fri Jul 14, 2017 11:29 am

Hello,
Can you please try AT+WDSS=<Mode>,<Apn>[,<User>[,<Pwd>]]
Definations of parameters are:-

<Mode>: Mode
0 PDP context configuration for Device Services
1 user initiated connection to the Device Services server
2 activate the automatic registration

<Apn>: access point name for Device Services
string type, up to 50 chars

<User>: login for the APN
string type, up to 30 chars

<Pwd>: password for the APN
string type, up to 30 chars

Thanks & Regards,
Rex
User avatar
Rex_alex
 
Posts: 1365
Joined: Thu Jan 01, 1970 12:00 am
Has thanked: 0 time
Have thanks: 82 times

Re: APN Settings EM7305

Postby cknubel » Mon Jul 17, 2017 11:32 am

Hello,

Yes i tried that already. As response I only get error.


But i checked the comands which I get with AT+CLAC again and found this one:

AT$QCPDPP and tried it like they discribe it here http://whirlpool.net.au/wiki/sierra_advanced

And it sets the username and password
cknubel
 
Posts: 2
Joined: Mon Jun 26, 2017 6:56 am
Has thanked: 0 time
Have thanks: 0 time


Return to MC Series + EM74

Who is online

Users browsing this forum: No registered users and 3 guests