Hi All
I found the answer to my question
What you need to do is connect the boot pin (pin/ball W18)
to 1.8V pin (pin/ball AD5)
I have found the 2 locations on the pcb
1.8V Location at sim holder
Boot Pin Location
then you can use DWLwin to fix it
I hope this info is usefull to somebody else as well
But please remember when you do this on a in warentee unit, the warentee will be void
But since my unit was already out of warentee, I do not have to worry about that :mrgreen:
Cheers
Walter