Hi,
I just want to add the command to retrieve the information from USIM-Cards. These use a different command set, as described in ETSI TS 102 221.[1]
The command would be
at+csim=10,“0020000100”
+CSIM: 4,“63C2”
where the last byte is the number of remaining tries. Is the card blocked, it can be 63C0 or 6983.
best regards,
Arne
[1]http://de.scribd.com/doc/80516914/Etsi-Ts-102-221-UICC-Terminal-Interface-Phy-Logical-Characteristics , page 96