wip_bearerStart is returning WIP_BERR_OK_INPROGRESS

WIPlib and WIPsoft, TCP, UDP, FTP, SSL, HTTP, gateway services, …

wip_bearerStart is returning WIP_BERR_OK_INPROGRESS

Postby ganeshkimidi » Sat Aug 20, 2016 6:48 am

Hi every one,
I am trying to start a UART bear but it is returning WIP_BERR_OK_INPROGRESS after 2 minutes i am getting WIP_BEV_CONN_FAILED event.

Please find below followed steps for stating UART bearer.

ret = wip_netInitOpts ( WIP_NET_OPT_END ); //getting success

bearerRet = wip_bearerOpen ( &br, "UART1", cbEvhBearer, NULL ); //getting success

bearerRet = wip_bearerSetOpts ( br,
WIP_BOPT_LOGIN, PPP_USER,
WIP_BOPT_PASSWORD, PPP_PASSWORD,
WIP_BOPT_IP_ADDR, localAddr,
WIP_BOPT_IP_DST_ADDR, destAddr,
WIP_BOPT_END ); //getting success

bearerRet = wip_bearerStart ( br ); // Returning WIP_BERR_OK_INPROGRESS.
After 2 minutes i am getting WIP_BEV_CONN_FAILED event.

I am struggling this issue last 1 month but still i am not able to resolve it. Please give me some suggestions it would be really helpful to me. Thanks for advance.
ganeshkimidi
 
Posts: 36
Joined: Thu Jun 23, 2016 10:48 pm
Has thanked: 0 time
Have thanks: 0 time

Re: wip_bearerStart is returning WIP_BERR_OK_INPROGRESS

Postby ganeshkimidi » Sat Aug 20, 2016 6:49 am

I am working on SL8082BTA and firmware 6.54.1.A1.
ganeshkimidi
 
Posts: 36
Joined: Thu Jun 23, 2016 10:48 pm
Has thanked: 0 time
Have thanks: 0 time


Return to TCP/IP, Internet and Security libraries

Who is online

Users browsing this forum: No registered users and 1 guest