DS cannot connect to SL8080

Developer Studio, Discovery Tool, Watcher

DS cannot connect to SL8080

Postby bvalletta » Thu Aug 15, 2013 5:51 pm

I am working with the SL Series Development Kit with an SL8080 socket board and when I try to open a port (either Serial or USB) in the Developer Studio I get:

Open and load local port COM1 => ERROR: Time out: 20000ms
Open and load physical port COM1 => ERROR: Time out: 20000ms
Open port COM1 => DONE: Port opened
Open port COM1 => DONE: Port opened
Load informations from target => ERROR: Time out: 20000ms
Waiting for module detection => ERROR: Time out: 20000ms

I can communicate via Serial COM with TeraTerm (just sending AT commands), however, I cannot communicate at all via USB. I have all the accompanying drivers installed (they show up in the Device Manager), and I am working with the latest DS (2.3.1).

Is there anything settings in the SL8080 module that I need change or set? What am I missing?! Thanks all.
bvalletta
 
Posts: 12
Joined: Mon Aug 12, 2013 10:16 am
Has thanked: 0 time
Have thanks: 0 time

Re: DS cannot connect to SL8080

Postby bvalletta » Thu Aug 15, 2013 6:27 pm

I found the module I am working with was configured to enable AT commands on UART. I issued an AT!MAPUART=0 and AT!RESET to remap back to USB. And when I try to connect DS with USB I get the error message:

Open and load local port COM28 => ERROR: An error ocurred during HAPC AT test
Open and load physical port COM28 => ERROR: An error ocurred during HAPC AT test
Open port COM28 => DONE: Success
Wait for USB port to reconnect => DONE: Success
Open port COM28 => DONE: Port opened
Pause : 1000 milliseconds => NO NEED TO DO IT: Success
Load informations from target => ERROR: An error ocurred during HAPC AT test
Waiting for module detection => DONE: Target detected sn:null baudrate:null
Switch to Development mode and check => ERROR: An error ocurred during HAPC AT test
Switch to Development mode => DONE: Success
Pause : 300 milliseconds => DONE: Success
Check dev mode unlocked => ERROR: An error ocurred during HAPC AT test
Switch to Development mode and check => ERROR: An error ocurred during HAPC AT test
Switch to Development mode => DONE: Success
Pause : 300 milliseconds => DONE: Success
Check dev mode unlocked => ERROR: An error ocurred during HAPC AT test
Switch to Development mode and check => ERROR: An error ocurred during HAPC AT test
Switch to Development mode => DONE: Success
Pause : 300 milliseconds => DONE: Success
Check dev mode unlocked => ERROR: An error ocurred during HAPC AT test

AND console output:

AT+WMSN

ERROR
AT+CFUN=1

OK
AT+WMSN

ERROR

atat

OK

atat

OK

atat

OK
bvalletta
 
Posts: 12
Joined: Mon Aug 12, 2013 10:16 am
Has thanked: 0 time
Have thanks: 0 time

Re: DS cannot connect to SL8080

Postby daav » Tue Aug 20, 2013 6:20 am

Is your module a T one? (SL8080T?)
Because if it's not the case, it is not able to run the Open AT Application Framework, and is not compatible with Developer Studio.
Developer Studio dev team
User avatar
daav
 
Posts: 1201
Joined: Thu Oct 20, 2005 11:45 am
Location: Paris, France
Has thanked: 8 times
Have thanks: 87 times

Re: DS cannot connect to SL8080

Postby ToF » Tue Aug 20, 2013 3:17 pm

Dear bvalletta,

Have a look here to double check that your module is a T variant fo the SL8080.
Connect with us on Open AT Developer Network
User avatar
ToF
 
Posts: 170
Joined: Thu Dec 06, 2007 8:21 am
Location: Paris, France
Has thanked: 5 times
Have thanks: 15 times


Topic Tags

Open AT, SL8080T

Return to Development tools

Who is online

Users browsing this forum: No registered users and 2 guests