340U packet flow at linux

ADL, A&D memory, Flash objects, multi-tasking, file system, DOTA.

340U packet flow at linux

Postby hagay » Mon May 25, 2015 10:05 am

Hello experts,

I try to work with AirCard 340U cellular modem over Linux.
I take the NetGear doc that describe how to work with Linux (at Linux-Support-S2.13N2.25.zip)

I install the following drivers:
GobiUSBNet
qcserial
GobiSerial
qmi_wwan
cdc_wdm
cdc_ncm
cdc_mbim

and now I connect the modem and have usb0 interface.
I call “ifconfig usb0 up” and the modem show me connection to the network.
All is great up to now.

Now the problems start:
I try to run DHCP client in order to get IP address to usb0, but I don`t get any IP address.
At “ifconfig usb0” I get some Rx & Tx packet.
After a while I see a lot of errors from the usbnet driver:
usb0: no read resubmitted
rx_complete - error -71


I start debug:
I see one msgs of “usb0: > tx, len 328, type 0x800” although I have about 43 tx_packets at the stats
I didn`t see any Rx msgs although at the stats there were 35 rx_packets

I suspect the some driver is changing usb0 stats, and I really find that QMIDevice.c at QMIWDSCallback() update the stats, but at usbnet I didn`t receive them so they don`t pass to usb0 interface.
What is the packet flow for QMI modems ?
Did someone know how to help with it ?

Thanks,
hagay
 
Posts: 1
Joined: Thu May 21, 2015 7:42 am
Has thanked: 0 time
Have thanks: 0 time

Re: 340U packet flow at linux

Postby Rex_alex » Tue Jun 09, 2015 6:19 am

hi,
Since April 2013, all AirCard Mobile Broadband Devices are marketed, sold and supported by NETGEAR, Inc. Please consult http://support.netgear.com

Thanks,
Alex
User avatar
Rex_alex
 
Posts: 1392
Joined: Thu Jan 01, 1970 12:00 am
Has thanked: 0 time
Have thanks: 83 times


Return to Operating system

Who is online

Users browsing this forum: No registered users and 4 guests