root@DrBox_default_name:~# dmesg [ 0.000000] Kernel is starting... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.14.29ltsi-a00e464379_935efbf4d8 (ubuntu@fx30-3G-Build) (gcc version 4.9.1 (GCC) ) #2 PREEMPT Wed Jun 17 10:40:52 UTC 2020 [ 0.000000] CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: QCT MSM9615 CDP [ 0.000000] memory pool 3 (start 4ff00000 size 100000) initialized [ 0.000000] Memory policy: Data cache writeback [ 0.000000] L310 cache controller enabled [ 0.000000] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x00540000, Cache size: 262144 B [ 0.000000] socinfo_init: v7, id=106, ver=3.0, raw_id=1760, raw_ver=1760, hw_plat=0, hw_plat_ver=65536 [ 0.000000] accessory_chip=0, hw_plat_subtype=0, pmic_model=19, pmic_die_revision=3 [ 0.000000] On node 0 totalpages: 41216 [ 0.000000] free_area_init_node: node 0, pgdat c0aa9fac, node_mem_map cf507000 [ 0.000000] Normal zone: 496 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 41216 pages, LIFO batch:7 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 40720 [ 0.000000] Kernel command line: console=ttyHSL0,115200 console=ttyHSL1,115200 fudge_ro_rootfs=true rootfs_ro=true mtdparts=msm_nand:0x00100000@0x051c0000(bootloader),0x01400000(kernel),0x03140000(rootfs),0x02780000(user0),0x08b80000(user1),0x00500000(user2),0x00200000(user3) androidboot.serialno=MDM9615 lkversion=1.3.0_60bd61b81c androidboot.baseband=msm [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] allocated 507904 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 150476K/164864K available (6775K kernel code, 633K rwdata, 2236K rodata, 1369K init, 1268K bss, 14388K reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xd0000000 - 0xff000000 ( 752 MB) [ 0.000000] lowmem : 0xc0000000 - 0xcf800000 ( 248 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc08d4f88 (9012 kB) [ 0.000000] .init : 0xc08d5000 - 0xc0a2b594 (1370 kB) [ 0.000000] .data : 0xc0a2c000 - 0xc0aca41c ( 634 kB) [ 0.000000] .bss : 0xc0aca41c - 0xc0c074fc (1269 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:681 [ 0.000030] sched_clock: 32 bits at 32kHz, resolution 30520ns, wraps every 65542000541696ns [ 0.000518] Console: colour dummy device 80x30 [ 0.000579] Calibrating delay loop... 366.18 BogoMIPS (lpj=1830912) [ 0.060094] pid_max: default: 32768 minimum: 301 [ 0.060552] Security Framework initialized [ 0.060643] Smack: Initializing. [ 0.061071] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.061101] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.062841] Initializing cgroup subsys debug [ 0.062871] Initializing cgroup subsys memory [ 0.062963] Initializing cgroup subsys devices [ 0.062994] Initializing cgroup subsys freezer [ 0.062994] Initializing cgroup subsys net_cls [ 0.063024] Initializing cgroup subsys blkio [ 0.063085] CPU: Testing write buffer coherency: ok [ 0.063177] ftrace: allocating 22886 entries in 68 pages [ 0.145215] Setting up static identity map for 0x40e20fc0 - 0x40e21018 [ 0.166793] devtmpfs: initialized [ 0.176316] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1 [ 0.178971] regulator-dummy: no parameters [ 0.179551] NET: Registered protocol family 16 [ 0.180741] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.180985] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver [ 0.181077] gpiochip_add: registered GPIOs 0 to 87 on device: msmgpio [ 0.181626] ->gpioRI = 1 [ 0.181657] ->gpioDTR = 1 [ 0.181687] ->gpioDCD = 1 [ 0.181687] ->gpioDSR = 1 [ 0.181748] gpio_sync_ri: RI owner is Modem [ 0.181779] ->gpio16 = 0 [ 0.181779] ->gpio17 = 0 [ 0.181809] ->gpio18 = 0 [ 0.181809] ->gpio19 = 0 [ 0.182664] msm_serial_hsl_init: driver initialized [ 0.183274] cpuidle: using governor ladder [ 0.183274] cpuidle: using governor menu [ 0.184037] msm_rpm_init: RPM firmware 3.0.16842958 [ 0.184312] gpio_cf3_low_power_reset_toggle: Setting up LowPower_RESET pin toggle timer [ 0.275019] gpio_cf3_low_power_reset_timer_callback: LowPower_RESET pin toggled high [ 0.275019] gpio_cf3_low_power_reset_timer_callback: LowPower_RESET pin toggle timer deleted [ 0.385136] unmatched machine ID in register_i2c_devices [ 0.385167] wl18xx board initialization done [ 0.385685] 8018_s1: 500 <--> 1150 mV at 1150 mV normal idle [ 0.386113] 8018_s2: 1225 <--> 1300 mV at 1300 mV normal idle [ 0.386998] 8018_s3: 1800 mV normal idle [ 0.387547] 8018_s4: 2100 <--> 2200 mV at 2200 mV normal idle [ 0.388371] 8018_s5: 1350 mV normal idle [ 0.389256] 8018_l2: 1800 mV normal idle [ 0.390141] 8018_l3: 1800 mV normal idle [ 0.390569] 8018_l4: 3300 mV normal idle [ 0.390965] 8018_l5: 2850 mV normal idle [ 0.391362] 8018_l6: 1800 <--> 2850 mV at 2850 mV normal idle [ 0.391759] 8018_l7: 1850 <--> 1900 mV at 1900 mV normal idle [ 0.391881] 8018_l7: supplied by 8018_s4 [ 0.392247] 8018_l8: 1200 mV normal idle [ 0.392339] 8018_l8: supplied by 8018_s3 [ 0.392736] 8018_l9: 750 <--> 1150 mV at 1150 mV normal idle [ 0.392827] 8018_l9: supplied by 8018_s5 [ 0.393224] 8018_l10: 1050 mV normal idle [ 0.393316] 8018_l10: supplied by 8018_s5 [ 0.393712] 8018_l11: 1050 mV normal idle [ 0.393804] 8018_l11: supplied by 8018_s5 [ 0.394231] 8018_l12: 1050 mV normal idle [ 0.394323] 8018_l12: supplied by 8018_s5 [ 0.394719] 8018_l13: 1850 <--> 2950 mV at 2950 mV normal idle [ 0.395208] 8018_l14: 2850 mV normal idle [ 0.395605] 8018_lvs1: no parameters [ 0.395666] 8018_lvs1: supplied by 8018_s3 [ 0.396062] vdd_dig_corner: 0 <--> 0 mV at 0 mV [ 0.403357] ext_2p95v: no parameters [ 0.403540] gpio_vreg_probe: id=18, name=ext_2p95v, gpio=18, gpio_label=ext_2p95_en [ 0.404059] pm8018_probe: PMIC revision 1: F3 [ 0.404089] pm8018_probe: PMIC revision 2: 08 [ 0.404089] pm8018_probe: PMIC version: PM8018 rev 2.1 [ 0.404120] pm8018_probe: PMIC Restart Reason: Triggered from KPD (power key press) [ 0.405585] gpiochip_add: registered GPIOs 88 to 93 on device: pm-gpio [ 0.405676] pm_gpio_probe: OK: base=88, ngpio=6 [ 0.406165] gpiochip_add: registered GPIOs 94 to 99 on device: pm8xxx-mpp [ 0.406226] pm8xxx_mpp_probe: OK: base=94, ngpio=6 [ 0.408332] msm_serial_hsl_probe: ttyHSL0 could be used as generic serial port. [ 0.408362] msm_serial_hsl_probe: detected port #0 (ttyHSL0) [ 0.408667] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16340000 (irq = 184, base_baud = 460800) is a MSM [ 0.409888] msm_serial_hsl_probe: ttyHSL1 could be used as generic serial port. [ 0.409888] msm_serial_hsl_probe: detected port #1 (ttyHSL1) [ 0.410193] msm_serial_hsl.1: ttyHSL1 at MMIO 0x16440000 (irq = 186, base_baud = 460800) is a MSM [ 0.421852] cpufreq_table_init: CPU: 4 scaling frequencies supported. [ 0.422371] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0 [ 0.422401] hw-breakpoint: CPU 0 failed to disable vector catch [ 0.423073] socinfo_init_dev: device_register fail (-22) [ 0.426369] sps:REVISION of BAM 0xd0060000 is 0x5. [ 0.426430] sps:BAM 0x12244000 is registered. [ 0.426857] sps:sps is ready.<6>[ 0.464428] bio: create slab at 0 [ 0.466992] pca953x 0-0020: interrupt support not compiled in [ 0.467358] gpiochip_add: registered GPIOs 200 to 215 on device: tca6416 [ 0.467572] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:187 [ 0.467602] qup_i2c qup_i2c.0: I2C slave addr:0x22 not connected [ 0.467633] pca953x 0-0022: failed reading register [ 0.467663] pca953x: probe of 0-0022 failed with error -107 [ 0.468823] ION heap vmalloc created [ 0.468853] ION heap iommu created [ 0.468914] ION heap audio created at 4ff01000 with size af000 [ 0.469616] pm8xxx_pwm_probe: OK [ 0.469739] swimcu_i2c_init: start [ 0.469800] swimcu_i2c_probe: start 1 [ 0.469830] swimcu_device_init: start 0x0 [ 0.469861] register_sierra_gpio_wake_notifier [ 0.470318] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:187 [ 0.470379] qup_i2c qup_i2c.0: I2C slave addr:0x3a not connected [ 0.517137] swimcu_gpio_retrieve 0 [ 0.517259] swimcu_pm_sysfs_init: success func 1 [ 0.517533] swimcu_pm_sysfs_init: success func 2 [ 0.518052] gpiochip_add: registered GPIOs 100 to 107 on device: swimcu [ 0.536334] swimcu_device_init: success [ 0.536548] GPIOs are not in Slimbus mode [ 0.536609] msm_slim_ctrl: probe of msm_slim_ctrl.1 failed with error -5 [ 0.537311] usbcore: registered new interface driver usbfs [ 0.537433] usbcore: registered new interface driver hub [ 0.537738] usbcore: registered new device driver usb [ 0.538562] Advanced Linux Sound Architecture Driver Initialized. [ 0.539752] NetLabel: Initializing [ 0.539752] NetLabel: domain hash size = 128 [ 0.539783] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.539905] NetLabel: unlabeled traffic allowed by default [ 0.541034] Switched to clocksource gp_timer [ 0.605127] NET: Registered protocol family 2 [ 0.607080] TCP established hash table entries: 2048 (order: 1, 8192 bytes) [ 0.607141] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) [ 0.607202] TCP: Hash tables configured (established 2048 bind 2048) [ 0.607294] TCP: reno registered [ 0.607324] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.607355] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.770547] smem_find(9, 464): wrong size 912 [ 0.770578] get_nand_partitions: no flash partition table in shared memory [ 0.774668] Notify: smsm init [ 0.782939] NET: Registered protocol family 27 [ 0.784220] apr_tal:Q6 Is Up [ 0.784434] apr_tal:Modem Is Up [ 0.786876] modem_8960_init: modem fatal driver init'ed. [ 0.787334] lpass_fatal_init: lpass SSR driver init'ed. [ 0.787913] msm_rpm_log_probe: OK [ 0.790721] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.982359] VFS: Disk quotas dquot_6.5.2 [ 0.982847] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.987425] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.989531] aufs 3.14-20140915 [ 0.989592] msgmni has been set to 293 [ 0.993560] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.993590] io scheduler noop registered [ 0.993621] io scheduler deadline registered [ 0.994048] io scheduler cfq registered (default) [ 0.994262] wake-n_gpio wake-n_gpio: wake_n probe [ 0.994597] gpio_check_and_wake: wake-n_gpio77 STATE=SLEEP [ 1.138013] msm_serial: driver initialized [ 1.138257] ttyHS0, function 0 is not valid on application processor. [ 1.138287] msm_serial_hs: probe of msm_serial_hs.0 failed with error -1 [ 1.138440] msm_serial_hs module loaded [ 1.151197] diag: Invalid Msg type 12 proc 2 [ 1.151411] diag: In diag_smd_cntl_send_req, proc=0, Nothing to read from SMD [ 1.151503] diag: In diag_smd_cntl_send_req, proc=0, Nothing to read from SMD [ 1.151625] diag: In diag_smd_cntl_send_req, proc=0, Nothing to read from SMD [ 1.153761] diagchar initialized now [ 1.179581] brd: module loaded [ 1.179734] wm8944_i2c_init [ 1.179795] wm8944_i2c_probe [ 1.179948] wm8944_device_init START [ 1.180161] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1363c8, irq:187 [ 1.182359] qup_i2c qup_i2c.0: I2C slave addr:0x1a not connected [ 1.182420] wm8944 0-001a: Failed to read ID register [ 1.182420] wm8944_device_init - Failed to add children: -107 [ 1.182572] wm8944: probe of 0-001a failed with error -107 [ 1.182908] i2c-core: driver [tabla-i2c-core] using legacy suspend method [ 1.182939] i2c-core: driver [tabla-i2c-core] using legacy resume method [ 1.183976] msm_nand_init: Enabling failed write checking [ 1.184098] msm_nand_probe: phys addr 0x1b400000 [ 1.184190] msm_nand_probe: dmac 0x3 [ 1.184282] msm_nand_probe: allocated dma buffer at d006c000, dma_addr 4f0cc000 [ 1.184282] flash_onfi_probe: No partition info available [ 1.184983] status: c03020 [ 1.184983] nandid: 1590ac2c maker 2c device ac [ 1.185014] Setting mtd->writebufsize to 0x800 [ 1.185075] Found a supported NAND device [ 1.185075] NAND Controller ID : 0x4030 [ 1.185106] NAND Device ID : 0x1590ac2c [ 1.185106] Buswidth : 8 Bits [ 1.185136] Density : 512 MByte [ 1.185136] Pagesize : 2048 Bytes [ 1.185136] Erasesize: 131072 Bytes [ 1.185167] Oobsize : 64 Bytes [ 1.185167] CFG0 Init : 0xa8d408c0 [ 1.185197] CFG1 Init : 0x0004745c [ 1.185197] ECCBUFCFG : 0x00000203 [ 1.185228] CW size : 528 bytes [ 1.185228] BCH ECC : disabled [ 1.185289] 7 cmdlinepart partitions found on MTD device msm_nand [ 1.185319] Creating 7 MTD partitions on "msm_nand": [ 1.185350] 0x0000051c0000-0x0000052c0000 : "bootloader" [ 1.188249] 0x0000052c0000-0x0000066c0000 : "kernel" [ 1.204364] 0x0000066c0000-0x000009800000 : "rootfs" [ 1.243003] 0x000009800000-0x00000bf80000 : "user0" [ 1.275782] 0x00000bf80000-0x000014b00000 : "user1" [ 1.386357] 0x000014b00000-0x000015000000 : "user2" [ 1.392430] 0x000015000000-0x000015200000 : "user3" [ 1.397131] spi_qsd spi_qsd.0: master is unqueued, this is deprecated [ 1.397833] rmnet_init: BAM devices[8] [ 1.408332] usbcore: registered new interface driver kaweth [ 1.408362] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.408484] usbcore: registered new interface driver pegasus [ 1.408606] usbcore: registered new interface driver rtl8150 [ 1.408759] usbcore: registered new interface driver asix [ 1.408881] usbcore: registered new interface driver cdc_ether [ 1.408972] usbcore: registered new interface driver dm9601 [ 1.409156] usbcore: registered new interface driver smsc75xx [ 1.409308] usbcore: registered new interface driver smsc95xx [ 1.409430] usbcore: registered new interface driver net1080 [ 1.409522] usbcore: registered new interface driver cdc_subset [ 1.409644] usbcore: registered new interface driver zaurus [ 1.409766] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 1.409949] usbcore: registered new interface driver int51x1 [ 1.410102] usbcore: registered new interface driver cdc_ncm [ 1.410132] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.424172] msm_hsusb_host msm_hsusb_host: unable to find transceiver [ 1.437356] platform msm_hsusb_host: Driver msm_hsusb_host requests probe deferral [ 1.450602] msm_hsic_host msm_hsic_host: Qualcomm EHCI Host Controller using HSIC [ 1.450694] msm_hsic_host msm_hsic_host: new USB bus registered, assigned bus number 1 [ 1.471173] msm_hsic_host msm_hsic_host: irq 264, io mem 0x12540000 [ 1.491133] msm_hsic_host msm_hsic_host: USB 2.0 started, EHCI 1.00 [ 1.493514] hub 1-0:1.0: USB hub found [ 1.493636] hub 1-0:1.0: 1 port detected [ 1.495528] usbcore: registered new interface driver cdc_acm [ 1.495528] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.495833] usbcore: registered new interface driver usbserial [ 1.495956] usbcore: registered new interface driver ftdi_sio [ 1.496047] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.496291] usbcore: registered new interface driver option [ 1.496413] usbserial: USB Serial support registered for GSM modem (1-port) [ 1.496688] usbcore: registered new interface driver qcserial [ 1.496810] usbserial: USB Serial support registered for Qualcomm USB modem [ 1.496963] usbcore: registered new interface driver sierra [ 1.497054] usbserial: USB Serial support registered for Sierra USB modem [ 1.497176] usbcore: registered new interface driver GobiSerial [ 1.497268] usbserial: USB Serial support registered for GobiSerial [ 1.497390] usbcore: registered new interface driver usb_ehset_test [ 1.497512] msm_otg msm_otg: msm_otg probe [ 1.497573] msm_otg msm_otg: failed to get phy_clk [ 1.497634] msm_otg msm_otg: OTG regs = d0076000 [ 1.500381] misc usb_link: registered misc device minor 47 [ 1.501693] msm_hsusb msm_hsusb: ci_hdrc_msm_probe [ 1.502182] ci_hdrc ci_hdrc.0: ChipIdea HDRC found, lpm: 0; cap: d0078100 op: d0078140 [ 1.504410] mbim_init: initialize 1 instances [ 1.504806] mbim_init: Initialized 1 ports [ 1.510300] rndis_qc_init: initialize rndis QC instance [ 1.511979] android_usb gadget: android_usb ready [ 1.513474] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8018-core/pm8xxx-pwrkey/input/input0 [ 1.516068] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0 [ 1.516404] i2c /dev entries driver [ 1.518022] pm8xxx-adc supply pa_therm not found, using dummy regulator [ 1.518419] swimcu_hwmon_probe: start [ 1.518724] swimcu_hwmon_probe: success num 2 [ 1.542682] pm8xxx_tm_probe: OK [ 1.543476] usbcore: registered new interface driver usbhid [ 1.543506] usbhid: USB HID core driver [ 1.544880] usbcore: registered new interface driver snd-usb-audio [ 1.546833] voice_allocate_shared_memory: ION memory allocation failed [ 1.547260] msm_pcm_probe: dev name msm-voip-dsp [ 1.547718] msm_pcm_probe: dev name msm-host-pcm-voice [ 1.549000] msm_pcm_probe: dev name msm-pcm-dsp [ 1.549244] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp [ 1.550862] mdm9615_audio_init(): Interface Type (wm8944) = 0 [ 1.550892] mdm9615_audio_init - AR8, AR755xRD and CF3 configuration [ 1.551442] soc-audio soc-audio.0: ASoC: machine mdm9615-nocodec-snd-card should use snd_soc_register_card() [ 1.565969] soc-audio soc-audio.0: snd-soc-dummy-dai <-> MultiMedia1 mapping ok [ 1.566427] soc-audio soc-audio.0: snd-soc-dummy-dai <-> MultiMedia2 mapping ok [ 1.566854] soc-audio soc-audio.0: snd-soc-dummy-dai <-> CS-VOICE mapping ok [ 1.567251] soc-audio soc-audio.0: snd-soc-dummy-dai <-> VoIP mapping ok [ 1.567526] soc-audio soc-audio.0: msm-stub-rx <-> msm-dai-q6.241 mapping ok [ 1.567831] soc-audio soc-audio.0: msm-stub-tx <-> msm-dai-q6.240 mapping ok [ 1.568228] soc-audio soc-audio.0: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok [ 1.568625] soc-audio soc-audio.0: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok [ 1.569021] soc-audio soc-audio.0: snd-soc-dummy-dai <-> VoLTE mapping ok [ 1.569479] soc-audio soc-audio.0: snd-soc-dummy-dai <-> DTMF_RX_HOSTLESS mapping ok [ 1.569784] soc-audio soc-audio.0: msm-stub-tx <-> msm-dai-stub mapping ok [ 1.570059] msm_asoc_pcm_new: [ 1.570090] soc-audio soc-audio.0: msm-stub-tx <-> msm-dai-stub mapping ok [ 1.570364] msm_asoc_pcm_new: [ 1.570395] soc-audio soc-audio.0: msm-stub-rx <-> msm-dai-stub mapping ok [ 1.570669] msm_asoc_pcm_new: [ 1.570700] soc-audio soc-audio.0: msm-stub-tx <-> msm-dai-stub mapping ok [ 1.570975] msm_asoc_pcm_new: [ 1.571005] soc-audio soc-audio.0: msm-stub-rx <-> msm-dai-stub mapping ok [ 1.571402] soc-audio soc-audio.0: msm-stub-rx <-> msm-dai-q6.224 mapping ok [ 1.571616] soc-audio soc-audio.0: msm-stub-tx <-> msm-dai-q6.225 mapping ok [ 1.571829] soc-audio soc-audio.0: msm-stub-rx <-> msm-dai-q6.32773 mapping ok [ 1.572043] soc-audio soc-audio.0: msm-stub-tx <-> msm-dai-q6.32772 mapping ok [ 1.572226] soc-audio soc-audio.0: msm-stub-tx <-> msm-dai-q6.32771 mapping ok [ 1.572256] mdm9615_mc7_auxpcm_init() [ 1.572684] soc-audio soc-audio.0: msm-stub-rx <-> msm-dai-q6.2 mapping ok [ 1.572897] soc-audio soc-audio.0: msm-stub-tx <-> msm-dai-q6.3 mapping ok [ 1.573294] soc-audio soc-audio.0: msm-stub-rx <-> msm-dai-q6.0 mapping ok [ 1.573508] soc-audio soc-audio.0: msm-stub-tx <-> msm-dai-q6.1 mapping ok [ 1.585746] TCP: cubic registered [ 1.585808] NET: Registered protocol family 17 [ 1.586937] Registering SWP/SWPB emulation handler [ 1.595177] clock_late_init() disabled 43 unused clocks [ 1.597710] sps:BAM 0x124c2000 is registered. [ 1.603326] MSM Watchdog Initialized [ 1.603784] no pmic restart interrupt specified [ 1.606714] regulator-dummy: disabling [ 1.620631] msm_otg msm_otg: phy_reset: success [ 1.632229] rtc-pm8xxx rtc-pm8xxx: setting system clock to 1970-01-01 02:21:57 UTC (8517) [ 1.632290] ### dt-test ### No testcase data in device tree; not running tests [ 1.632351] gpio-216 (?): gpiod_request: status -517 [ 1.632382] gpio-220 (?): gpiod_request: status -517 [ 1.632382] ALSA device list: [ 1.632382] #0: mdm9615-nocodec-snd-card [ 1.632717] Warning: unable to open an initial console. [ 1.638577] Freeing unused kernel memory: 1368K (c08d5000 - c0a2b000) [ 1.836990] msm_otg msm_otg: OTG state changed, charger_type NOT changed [ 1.864489] ubi0: attaching mtd2 [ 2.011200] usb 1-1: new high-speed USB device number 2 using msm_hsic_host [ 2.043735] hub 1-1:1.0: USB hub found [ 2.044040] hub 1-1:1.0: 2 ports detected [ 2.157027] ubi0: scanning is finished [ 2.165267] ubi0 warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 58, need 80 [ 2.167404] ubi0: attached mtd2 (name "rootfs", size 49 MiB) [ 2.167434] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 2.167465] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 2.167465] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 2.167495] ubi0: good PEBs: 394, bad PEBs: 0, corrupted PEBs: 0 [ 2.167495] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 [ 2.167526] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1720292219 [ 2.167556] ubi0: available PEBs: 0, total reserved PEBs: 394, PEBs reserved for bad PEB handling: 58 [ 2.172409] ubi0: background thread "ubi_bgt0d" started, PID 76 [ 2.198901] block ubiblock0_0: created from ubi0:0(rootfs) [ 2.248313] random: nonblocking pool is initialized [ 2.321715] usb 1-1.1: new high-speed USB device number 3 using msm_hsic_host [ 2.381931] smsc95xx v1.0.4 [ 2.472638] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-msm_hsic_host-1.1, smsc95xx USB 2.0 Ethernet, b2:73:02:ea:1d:d7 [ 2.511368] ci_hdrc ci_hdrc.0: CI_HDRC_CONTROLLER_RESET_EVENT received [ 2.511674] ci_hdrc ci_hdrc.0: Connected to host [ 2.511704] msm_otg msm_otg: OTG state changed, charger_type changed [ 3.875080] NET: Registered protocol family 1 [ 4.207599] ubi2: attaching mtd4 [ 5.209400] ubi2: scanning is finished [ 5.241294] ubi2: attached mtd4 (name "user1", size 139 MiB) [ 5.241355] ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 5.241355] ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 5.241385] ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 5.241385] ubi2: good PEBs: 1116, bad PEBs: 0, corrupted PEBs: 0 [ 5.241416] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 5.241446] ubi2: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1162354208 [ 5.241446] ubi2: available PEBs: 0, total reserved PEBs: 1116, PEBs reserved for bad PEB handling: 80 [ 5.246635] ubi2: background thread "ubi_bgt2d" started, PID 146 [ 5.312284] block ubiblock2_0: created from ubi2:0(user1_vol0) [ 5.371402] UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 156 [ 5.486738] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "user1_vol0" [ 5.486799] UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 5.486830] UBIFS (ubi2:0): FS size: 129642496 bytes (123 MiB, 1021 LEBs), journal size 6475776 bytes (6 MiB, 51 LEBs) [ 5.486830] UBIFS (ubi2:0): reserved for root: 4952683 bytes (4836 KiB) [ 5.486860] UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 484E5F90-5C99-4F4B-9D73-1D84EAB2B15F, small LPT model [ 6.898702] ubi1: attaching mtd3 [ 7.187517] ubi1: scanning is finished [ 7.221333] ubi1: attached mtd3 (name "user0", size 39 MiB) [ 7.221364] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 7.221394] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 7.221394] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 7.221425] ubi1: good PEBs: 316, bad PEBs: 0, corrupted PEBs: 0 [ 7.221455] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 7.221455] ubi1: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 352322837 [ 7.221486] ubi1: available PEBs: 0, total reserved PEBs: 316, PEBs reserved for bad PEB handling: 80 [ 7.225911] ubi1: background thread "ubi_bgt1d" started, PID 175 [ 7.272241] block ubiblock1_0: created from ubi1:0(legato) [ 7.391698] yaffs: dev is 32505861 name is "mtdblock5" rw [ 7.391728] yaffs: passed flags "tags-ecc-off" [ 8.937677] SCSI subsystem initialized [ 9.131878] usbcore: registered new interface driver usb-storage [ 9.209491] mmc0: mci-version: 18 [ 9.221577] mmc0: bam physical base=0x12182000 [ 9.221608] mmc0: bam virtual base=0xd01fc000 [ 9.221638] sps:BAM 0x12182000 is registered. [ 9.221669] mmc0: BAM device registered. bam_handle=0xcdc40200<6>[ 9.222035] sps:REVISION of BAM 0xd01fc000 is 0x5. [ 9.222615] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 130 [ 9.222646] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012180800 [ 9.222737] mmc0: No card detect facilities available [ 9.227102] mmc0: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 136,0 dma -1 dmacrcri -1 [ 9.227132] mmc0: 8 bit data mode disabled [ 9.227132] mmc0: 4 bit data mode enabled [ 9.227163] mmc0: polling status mode disabled [ 9.227163] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz [ 9.227193] mmc0: Slot eject status = 0 [ 9.227193] mmc0: Power save feature enable = 1 [ 9.227224] mmc0: SPS-BAM data transfer mode available [ 9.411323] tun: Universal TUN/TAP device driver, 1.6 [ 9.411353] tun: (C) 1999-2004 Max Krasnyansky [ 9.677338] sps:BAM 0x12502000 is registered. [ 9.677704] enable_store: android_usb: already disabled [ 9.865832] Match for Function Name: diag, Int #0 [ 9.867633] Match for Function Name: rmnet0, Int #8 [ 9.867694] frmnet_bind: RmNet(0) dual Speed, IN:ep2in OUT:ep2out [ 9.867724] ecm_native_function_bind_config: ecm_native_function_bind_config MAC: 00:00:00:00:00:00 [ 9.867877] android_usb gadget: using random self ethernet address [ 9.892293] usb0: MAC 3a:86:0d:c7:a8:f2 [ 9.892324] usb0: HOST MAC 2e:f2:8a:9e:2b:90 [ 9.892354] Match for Function Name: cdc_ethernet, Int #19 [ 9.892385] Match for Function Name: cdc_ethernet, Int #20 [ 9.895528] msm_otg msm_otg: Avail curr from USB = 2 [ 9.895620] ci_hdrc ci_hdrc.0: CI_HDRC_CONTROLLER_SUSPEND_EVENT received [ 9.982481] otg_pc = 3 [ 10.391637] msm_otg msm_otg: USB in low power mode [ 12.313566] ip_tables: (C) 2000-2006 Netfilter Core Team [ 12.621883] NET: Registered protocol family 10 [ 12.720616] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 13.279505] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.368228] gpio_sync_ri: RI owner is Modem [ 14.368289] ->gpio16 = 0 [ 14.368289] ->gpio17 = 0 [ 14.368319] ->gpio18 = 0 [ 14.368319] ->gpio19 = 0 [ 14.374546] gpio_sync_ri: RI owner is Modem [ 14.374607] ->gpio16 = 0 [ 14.374607] ->gpio17 = 0 [ 14.374637] ->gpio18 = 0 [ 14.374637] ->gpio19 = 0 [ 14.383549] gpio_sync_ri: RI owner is Modem [ 14.383580] ->gpio16 = 0 [ 14.383610] ->gpio17 = 0 [ 14.383641] ->gpio18 = 0 [ 14.383641] ->gpio19 = 0 [ 14.393773] gpio_sync_ri: RI owner is Modem [ 14.393804] ->gpio16 = 0 [ 14.393834] ->gpio17 = 0 [ 14.393834] ->gpio18 = 0 [ 14.393865] ->gpio19 = 0 [ 14.431405] gpio_sync_ri: RI owner is Modem [ 14.431435] ->gpio16 = 0 [ 14.431466] ->gpio17 = 0 [ 14.431466] ->gpio18 = 0 [ 14.431497] ->gpio19 = 0 [ 14.443766] gpio_sync_ri: RI owner is Modem [ 14.443827] ->gpio16 = 0 [ 14.443827] ->gpio17 = 0 [ 14.443857] ->gpio18 = 0 [ 14.443857] ->gpio19 = 0 [ 14.450846] gpio_sync_ri: RI owner is Modem [ 14.450877] ->gpio16 = 0 [ 14.450907] ->gpio17 = 0 [ 14.450907] ->gpio18 = 0 [ 14.450938] ->gpio19 = 0 [ 14.451274] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:187 [ 14.457591] qup_i2c qup_i2c.0: I2C slave addr:0x3a not connected [ 14.513016] gpio_sync_ri: RI owner is Modem [ 14.513077] ->gpio16 = 0 [ 14.513108] ->gpio17 = 0 [ 14.513108] ->gpio18 = 0 [ 14.513139] ->gpio19 = 0 [ 14.548023] gpio_sync_ri: RI owner is Modem [ 14.548084] ->gpio16 = 0 [ 14.548084] ->gpio17 = 0 [ 14.548115] ->gpio18 = 0 [ 14.548115] ->gpio19 = 0 [ 14.572714] gpio_sync_ri: RI owner is Modem [ 14.572745] ->gpio16 = 0 [ 14.572775] ->gpio17 = 0 [ 14.572775] ->gpio18 = 0 [ 14.572806] ->gpio19 = 0 [ 14.641599] gpio_sync_ri: RI owner is Modem [ 14.641660] ->gpio16 = 0 [ 14.641660] ->gpio17 = 0 [ 14.641690] ->gpio18 = 0 [ 14.641690] ->gpio19 = 0 [ 14.644620] gpio_sync_ri: RI owner is Modem [ 14.644681] ->gpio16 = 0 [ 14.644681] ->gpio17 = 0 [ 14.644712] ->gpio18 = 0 [ 14.644712] ->gpio19 = 0 [ 14.672882] gpio_sync_ri: RI owner is Modem [ 14.672913] ->gpio16 = 0 [ 14.672943] ->gpio17 = 0 [ 14.672943] ->gpio18 = 0 [ 14.672974] ->gpio19 = 0 [ 14.675934] gpio_sync_ri: RI owner is Modem [ 14.675995] ->gpio16 = 0 [ 14.675995] ->gpio17 = 0 [ 14.676026] ->gpio18 = 0 [ 14.676026] ->gpio19 = 0 [ 14.701571] gpio_sync_ri: RI owner is Modem [ 14.701632] ->gpio16 = 0 [ 14.701663] ->gpio17 = 0 [ 14.701663] ->gpio18 = 0 [ 14.701693] ->gpio19 = 0 [ 14.734716] gpio_sync_ri: RI owner is Modem [ 14.734777] ->gpio16 = 0 [ 14.734777] ->gpio17 = 0 [ 14.734808] ->gpio18 = 0 [ 14.734808] ->gpio19 = 0 [ 14.754799] gpio_sync_ri: RI owner is Modem [ 14.754860] ->gpio16 = 0 [ 14.754890] ->gpio17 = 0 [ 14.754890] ->gpio18 = 0 [ 14.754921] ->gpio19 = 0 [ 14.767312] gpio_sync_ri: RI owner is Modem [ 14.767343] ->gpio16 = 0 [ 14.767373] ->gpio17 = 0 [ 14.767373] ->gpio18 = 0 [ 14.767404] ->gpio19 = 0 [ 14.789714] gpio_sync_ri: RI owner is Modem [ 14.789775] ->gpio16 = 0 [ 14.789775] ->gpio17 = 0 [ 14.789806] ->gpio18 = 0 [ 14.789806] ->gpio19 = 0 [ 14.801892] gpio_sync_ri: RI owner is Modem [ 14.801922] ->gpio16 = 0 [ 14.801953] ->gpio17 = 0 [ 14.801953] ->gpio18 = 0 [ 14.801983] ->gpio19 = 0 [ 14.836044] gpio_sync_ri: RI owner is Modem [ 14.836075] ->gpio16 = 0 [ 14.836105] ->gpio17 = 0 [ 14.836105] ->gpio18 = 0 [ 14.836136] ->gpio19 = 0 [ 14.844681] gpio_sync_ri: RI owner is Modem [ 14.844712] ->gpio16 = 0 [ 14.844742] ->gpio17 = 0 [ 14.844773] ->gpio18 = 0 [ 14.844773] ->gpio19 = 0 [ 14.889027] gpio_sync_ri: RI owner is Modem [ 14.889088] ->gpio16 = 0 [ 14.889119] ->gpio17 = 0 [ 14.889119] ->gpio18 = 0 [ 14.889150] ->gpio19 = 0 [ 14.941980] gpio_sync_ri: RI owner is Modem [ 14.942041] ->gpio16 = 0 [ 14.942041] ->gpio17 = 0 [ 14.942072] ->gpio18 = 0 [ 14.942072] ->gpio19 = 0 [ 14.953090] gpio_sync_ri: RI owner is Modem [ 14.953120] ->gpio16 = 0 [ 14.953151] ->gpio17 = 0 [ 14.953151] ->gpio18 = 0 [ 14.953181] ->gpio19 = 0 [ 14.963222] gpio_sync_ri: RI owner is Modem [ 14.963253] ->gpio16 = 0 [ 14.963283] ->gpio17 = 0 [ 14.963283] ->gpio18 = 0 [ 14.963314] ->gpio19 = 0 [ 18.780741] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1343c8, irq:187 [ 18.780833] qup_i2c qup_i2c.0: I2C slave addr:0x3a not connected [ 21.643735] gpio_sync_ri: RI owner is Modem [ 21.643766] ->gpio16 = 0 [ 21.643796] ->gpio17 = 0 [ 21.643796] ->gpio18 = 0 [ 21.643827] ->gpio19 = 0 [ 21.643827] gpio_map_name_to_num: gpioRI is not supported [ 21.643857] export_store: status -1 [ 35.069555] qup_i2c qup_i2c.0: QUP: I2C status flags :0x1300c8, irq:187 [ 35.069647] qup_i2c qup_i2c.0: I2C slave addr:0x53 not connected [ 37.032168] nf_conntrack version 0.5.0 (2372 buckets, 9488 max) [ 38.917747] sps:BAM is already registered: 12502000 [ 38.917808] usb_bam_init: register bam error -17 [ 38.917869] usb_bam usb_bam: failed to initialize usb bam [ 39.363558] Match for Function Name: diag, Int #0 [ 39.363619] Match for Function Name: rmnet0, Int #8 [ 39.363680] frmnet_bind: RmNet(0) dual Speed, IN:ep2in OUT:ep2out [ 39.363711] ecm_native_function_bind_config: ecm_native_function_bind_config MAC: 2E:F2:8A:9E:2B:90 [ 39.363894] android_usb gadget: using random self ethernet address [ 39.373447] usb0: MAC 7e:14:76:ad:99:2b [ 39.373477] usb0: HOST MAC 2e:f2:8a:9e:2b:90 [ 39.373538] Match for Function Name: cdc_ethernet, Int #19 [ 39.373538] Match for Function Name: cdc_ethernet, Int #20 [ 39.496352] otg_pc = 3 [ 40.151716] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready [ 41.695742] adb_open [ 42.493056] mbim_open: Open mbim driver [ 42.493087] mbim_open: Lock mbim_dev->open_excl for open [ 42.493117] mbim_open: USB cable not connected [ 42.493117] mbim_open: Exit, mbim file opened [ 42.495589] mbim_read: Requests list is empty. Wait. [ 149.942224] msm_otg msm_otg: USB exited from low power mode [ 149.945215] ci_hdrc ci_hdrc.0: CI_HDRC_CONTROLLER_SUSPEND_EVENT received [ 150.043705] ci_hdrc ci_hdrc.0: CI_HDRC_CONTROLLER_RESUME_EVENT received [ 150.043766] android_disconnect: android_disconnect: Disconnected [ 150.044925] android_work: android_work: sent uevent USB_STATE=DISCONNECTED [ 150.132977] android_setup: android_setup: Connected [ 150.134106] android_work: android_work: sent uevent USB_STATE=CONNECTED [ 150.228109] android_usb gadget: high-speed config #1: android_usb [ 150.228261] msm_otg msm_otg: Avail curr from USB = 500 [ 150.228292] android_setup: android_setup: Configured [ 150.228444] diag: USB connected [ 150.228994] sps:REVISION of BAM 0xd03d8000 is 0x5. [ 150.282130] android_work: android_work: sent uevent USB_STATE=CONFIGURED [ 150.547108] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready