parallels@parallels-vm:~$ sudo minicom -D /dev/ttyUSB0 Welcome to minicom 2.7 OPTIONS: I18n Compiled on Feb 7 2016, 13:37:27. Port /dev/ttyUSB0, 08:00:52 Press CTRL-A Z for help on special keys [930] DEBUG: cmdline has root= [1070] Channel alloc freed [ 0.000000] GIC CPU mask not found - kernel will fail to boot. [ 0.000000] GIC CPU mask not found - kernel will fail to boot. [ 0.000000] MPM 1 irq mapping errored -517 [ 0.071968] sierra:-sierra_smem_get_factory_mode-failed: smem have not initid [ 0.213723] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000 [ 0.227472] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517 [ 0.230395] smd_channel_probe_now: allocation table not initialized [ 0.237533] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,7 [ 0.263752] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517 [ 0.266473] msm_thermal:get_kernel_cluster_info CPU0 topology not initialize. [ 0.267383] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19) [ 0.267401] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table 9 [ 0.268112] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19) [ 0.268127] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table 9 [ 0.268142] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19) [ 0.268154] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table 9 [ 0.359437] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_cli. [ 0.362016] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_cli0 [ 0.412791] msm_bus_fabric_init_driver [ 0.600305] SWI ssmem_framework_init: SSMEM init OK [ 0.620963] scm_call failed with error code -4 [ 0.620982] msm_audio_protect_memory_region: SCM call failed, scm_call_ret -0 [ 0.625621] uart_tx_gpio is not available [ 0.625640] uart_rx_gpio is not available [ 0.625659] uart_cts_gpio is not available [ 0.625677] uart_rfr_gpio is not available [ 0.626319] sps: BAM device 0x07884000 is not registered yet. [ 0.631535] AXI: get_pdata(): Error: Client name not found [ 0.631545] AXI: msm_bus_cl_get_pdata(): client has to provide missing entryn [ 0.631553] msm_serial_hsl_probe: Bus scaling is disabled [ 0.841812] mdm9607-pinctrl 1000000.pinctrl: pin GPIO_4 already requested byl [ 0.852301] mdm9607-pinctrl 1000000.pinctrl: pin-4 (78b0000.serial) status -2 [ 0.859444] mdm9607-pinctrl 1000000.pinctrl: could not request pin 4 (GPIO_4l [ 0.870417] msm_serial_hsl 78b0000.serial: Error applying setting, reverse tk [ 0.926675] sps: BAM device 0x07984000 is not registered yet. [ 1.011280] unable to find DT imem DLOAD mode node [ 1.015332] unable to find DT imem EDLOAD mode node [ 1.020293] unable to find DT imem dload-type node [ 1.024839] Failed to disable secure wdog debug: -4 [ 1.055910] devfreq soc:qcom,cpubw: Couldn't update frequency transition inf. [ 1.063917] sdhci_msm 7864900.sdhci: sdhci_msm_pm_qos_parse_irq: error -22 ru [ 1.071928] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86) [ 1.153575] bmi160 4-0068: BMI160 qpio number:78 [ 1.169178] mdm9607-pinctrl 1000000.pinctrl: pin GPIO_79 already requested bc [ 1.215146] mdm9607-pinctrl 1000000.pinctrl: pin-79 (soc:qcom,msm-dai-mi2s:q2 [ 1.239769] mdm9607-pinctrl 1000000.pinctrl: could not request pin 79 (GPIO_l [ 1.267317] msm-dai-q6-mi2s soc:qcom,msm-dai-mi2s:qcom,msm-dai-q6-mi2s-sec: k [ 1.316976] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm_asoc_machine_pro0 [ 1.365267] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm_asoc_machine_pro0 [ 1.408652] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm_asoc_machine_pro0 [ 1.442210] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm_asoc_machine_pro0 [ 1.451025] calculate_residency: residency < 0 for LPM [ 1.455126] parse_cpu_levels: idx 1 420 [ 1.458943] calculate_residency: residency < 0 for LPM [ 1.503918] parse_cpu_levels: idx 2 500 [ 1.506723] parse_cpu_levels: idx 2 3040 [ 1.532713] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm_asoc_machine_pro0 [ 1.552015] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm_asoc_machine_pro) Non-secure. UBI device number 0, total 120 LEBs (30474240 bytes, 29.1 MiB), available 5 LEB) [ 7.094052] device-mapper: table: 253:0: verity: Cannot initialize hash funcn device-mapper: reload ioctl failed: No such file or directory Device: rt ubiImgBlock:/dev/ubiblock0_0 hashBlock:/dev/ubiblock0_1 root_hash:40636ee2e72095cf3974f93617bb07dc12cf9038a4a713b1261c7094c341114e Dm-verity partition creation failed. rootfs: dev '/dev/ubiblock0_0' 'squashfs' rootfs: mounting took 10ms init started: BusyBox v1.22.1 (2017-07-01 02:04:23 UTC) rcS: Executing mount_essential_fs... rcS: Executing simple_network... rcS: Executing run_S_scripts... S02mount_early: Executing mount_early_pseudo... S02mount_early: Executing mount_early_other... S02mount_early: Executing mount_early_create_dirs... S02mount_early: Executing mount_early_user_start... S02mount_early: User is forcing userapp file system to be ubifs. S02mount_early: Trying to mount UBIFS on /mnt/flash using [usrquota,grpquota,rw. S02mount_early: UBI: mtd 16 is UBI. UBI device number 3, total 524 LEBs (133070848 bytes, 126.9 MiB), available 5 L) S02mount_early: Performing quota check on file system mounted at /mnt/flash S02mount_early: UBIFS volume successfully mounted on /mnt/flash S02mount_early: Executing mount_early_legato_start... Can't get valid SMEM, init DSSD SMEM Linux sub system 1 mount Legato from partition lefwkro UBI device number 2, total 35 LEBs (8888320 bytes, 8.5 MiB), available 0 LEBs () S02mount_early: Non-secure ! S02mount_early: UBI: mtd 14 is UBI. S02mount_early: SQUASHFS successfully mounted on /mnt/legato S02mount_early: Executing mount_early_userrw_start... S02mount_early: Mounting swirw file system as UBIFS S02mount_early: Trying to mount UBIFS on /mnt/userrw using [usrquota,grpquota,r. S02mount_early: UBI: mtd 15 is UBI. UBI device number 4, total 100 LEBs (25395200 bytes, 24.2 MiB), available 2 LEB) S02mount_early: Performing quota check on file system mounted at /mnt/userrw S02mount_early: UBIFS volume successfully mounted on /mnt/userrw S02mount_early: swirw mounted to /mnt/userrw S03confighw.sh: Kernel internal entropy pool filler is available, increasing wr2 S04mount_unionfs: RO rootfs fudge allowed. Mounting local filesystems... [ 15.199009] UBIFS error (pid: 433): cannot open "ubi0:usrfs", error -19mounte MTD : Detected block device : /firmware for modem UBI device number 1, total 128 LEBs (32505856 bytes, 31.0 MiB), available 0 LEB) Initializing random number generator... Switching to composition sierra_dev (1199:68C0) [ 16.033396] enable_store: android_usb: already disabled Configuring network interfaces... done. Starting syslogd/klogd: done ifconfig: SIOCGIFFLAGS: No such device Starting diagrebootapp: done $Starting qcom_time: starting time-daemon Starting time_services: done Legato start sequence restart_at_uart: Mapped UART1 for AT service Finished Legato start Sequence Starting reboot daemon: done Starting atreset: done Starting modem dependent daemons: [ 26.820989] M-Notify: General: 7 [ 26.863612] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add ror [ 26.896865] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add ror [ 26.927077] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add ror [ 27.008516] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add ror [ 27.023877] diag: In diag_send_feature_mask_update, control channel is not oc [ 27.185745] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add ror [ 27.238051] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widgetX [ 27.286511] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add ro3 [ 27.332965] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add ror [ 27.367045] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add ror [ 27.402773] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget fX [ 27.427716] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add roX Load modem done Starting qmuxd: done Starting thermal-engine: done Starting irsc_util: Starting irsc tool Failed to open file:/etc/sec_config Absent/Invalid config,Default rules apply Ending irsc tool done Starting netmgrd: done Starting powerconfig for mdm9607: Starting fs-scrub-daemon: done net.ipv4.conf.default.rp_filter = 1 net.ipv4.conf.all.rp_filter = 1 [ 28.539606] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: mux SLIM_0_RX AAs rm: can't remove '/var/log/wtmp': No such file or directory Starting qmi_ip: done [ 28.728441] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-dtmf-txX [ 28.785525] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its p0 [ 28.925492] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-dtmf-txX starting DNS forwarder and DHCP server: dnsmasq... [ 29.056932] msm-dai-stub-X [ 29.122426] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rxX [ 29.189188] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rxX done. [ 29.256558] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rxK Starting Dropbear SSH server: [ 29.330458] msm-dai-stub-dev soc:qcom,msm-dai-X DONE [ 29.385035] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-txX [ 29.442684] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-txX dropbear. stopping DNS forwarder and DHCP server: dnsmasq... [ 29.510583] msm-dai-stub-K stopped /usr/bin/dnsmasq (pid 968) done. starting DNS forwarder and DHCP server: dnsmasq... done. run_getty.sh: ttyHSL1 reserved for CONSOLE Poky (Yocto Project Reference Distro) 1.7.3 swi-mdm9x28 /dev/ttyHSL1 swi-mdm9x28 login: