# WP7607 update problem

**URL:** <https://forum.sierrawireless.com/t/wp7607-update-problem/19043>\
**Category:** WP Series\
**Created:** [January 20, 2020, 11:58am UTC](https://forum.sierrawireless.com/t/wp7607-update-problem/19043 "2020-01-20T11:58:37Z")\
**Posts on this page:** 3\
**Page:** 2

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [May 25, 2021, 7:53am UTC](https://forum.sierrawireless.com/t/wp7607-update-problem/19043/21 "2021-05-25T07:53:19Z")

</div>

No, you need to specify the full path

e.g.  
fwupdate download /tmp/test.cwe

---

<div class="post-metadata">

**Author:** ![vitthal.agav](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/vitthal.agav/32/6388_2.png) [@vitthal.agav](https://forum.sierrawireless.com/u/vitthal.agav)\
**Post date:** [May 25, 2021, 8:29am UTC](https://forum.sierrawireless.com/t/wp7607-update-problem/19043/22 "2021-05-25T08:29:08Z")

</div>

No those commands are not to set the password.  
password you have to ask your vendor or try “A710”

those commands are to setup your ECM interface to ssh into module. that you have to do only if usb0 is not created in ifconfig.

give full path of firmware file to fwpudate

---

<div class="post-metadata">

**Author:** ![fashionshow0](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/fashionshow0/32/5555_2.png) [@fashionshow0](https://forum.sierrawireless.com/u/fashionshow0)\
**Post date:** [May 25, 2021, 5:27pm UTC](https://forum.sierrawireless.com/t/wp7607-update-problem/19043/23 "2021-05-25T17:27:38Z")

</div>

Hi @vitthal.agav ,

Sorry about that, It seems not work about some of the AT commands

 ![Screen Shot 0003-05-26 at 1.21.04 AM](https://us1.discourse-cdn.com/flex025/uploads/sierrawireless/original/2X/7/75c744b53abb38b661e127bf3cf0eb1816e25195.png)

But in some cases, for ex WP7607, when I ssh via [root@192.168.2.2](mailto:root@192.168.2.2), the prompt message will let

me to setup default password of ssh user.

But in some cases, for ex WP7611, it will show ssh fail by ssh `know_host` file like below

![Screen Shot 0003-05-26 at 1.23.23 AM](https://us1.discourse-cdn.com/flex025/uploads/sierrawireless/original/2X/a/a90bd1f636fe65b1de37c128df422cc746ba999c.png)

Is there anyways to reset / reconfigure ssh settings of legato system?

Thanks!

[Previous page](https://forum.sierrawireless.com/t/wp7607-update-problem/19043.md?page=1)
