# \[WP7607\] QMI interface with linux kernel driver

**URL:** <https://forum.sierrawireless.com/t/wp7607-qmi-interface-with-linux-kernel-driver/13662>\
**Category:** WP Series\
**Created:** [August 28, 2018, 1:42pm UTC](https://forum.sierrawireless.com/t/wp7607-qmi-interface-with-linux-kernel-driver/13662 "2018-08-28T13:42:38Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![nse15](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/nse15/32/3975_2.png) [@nse15](https://forum.sierrawireless.com/u/nse15)\
**Post date:** [August 28, 2018, 1:42pm UTC](https://forum.sierrawireless.com/t/wp7607-qmi-interface-with-linux-kernel-driver/13662/1 "2018-08-28T13:42:38Z")

</div>

Hi all,

I hava a WP7607 module into a mangoh red board.  
The module is working fine when I use the `CM` commands.

Now I try to connect to my board using USB and I want to use the mainline kernel qmi\_wwan driver and cdc-wdm device to configure the WP7607 using libqmi and amicli tool.

The module is recognized by my kernel (version 4.9)

> ```
> [23102.879227] usb 2-4.1: New USB device found, idVendor=1199, idProduct=68c0
> [23102.879229] usb 2-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [23102.879230] usb 2-4.1: Product: WP7607
> [23102.879231] usb 2-4.1: Manufacturer: Sierra Wireless, Incorporated
> [23102.879231] usb 2-4.1: SerialNumber: VN74538548070331
> [23102.890439] qcserial 2-4.1:1.0: Qualcomm USB modem converter detected
> [23102.890504] usb 2-4.1: Qualcomm USB modem converter now attached to ttyUSB0
> [23102.891348] qcserial 2-4.1:1.3: Qualcomm USB modem converter detected
> [23102.891407] usb 2-4.1: Qualcomm USB modem converter now attached to ttyUSB1
> [23102.894414] qmi_wwan 2-4.1:1.8: cdc-wdm0: USB WDM device
> [23102.894518] qmi_wwan 2-4.1:1.8 wwan0: register 'qmi_wwan' at usb-0000:03:00.0-4.1, WWAN/QMI device, c2:2b:a0:92:31:61
> [23102.900811] cdc_ether 2-4.1:1.19 usb0: register 'cdc_ether' at usb-0000:03:00.0-4.1, CDC Ethernet Device, 46:a3:6e:ae:9d:6c
> [23102.909908] cdc_ether 2-4.1:1.19 ens160u4u1i19: renamed from usb0
> [23102.938550] qmi_wwan 2-4.1:1.8 wws160u4u1i8: renamed from wwan0
> 
> ```

But I always have timeout using qmicli with the device /dev/cdc-wdm0.

My principal question is: Does the WP7607 support the mainline kernel driver or not ?

Thanks

---

<div class="post-metadata">

**Author:** ![mlw](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/mlw/32/3706_2.png) [@mlw](https://forum.sierrawireless.com/u/mlw)\
**Post date:** [August 28, 2018, 3:45pm UTC](https://forum.sierrawireless.com/t/wp7607-qmi-interface-with-linux-kernel-driver/13662/2 "2018-08-28T15:45:29Z")

</div>

@nse15,

In theory, yes you can use it and plenty of people do (as it uses the same VID/PID as some of our MC’s), but it is not recommended as we do not support it if you use it and hit problems, we obviously recommend our own driver.

Regards

Matt
