# \[WP7605\]What is Minimum Functionality

**URL:** <https://forum.sierrawireless.com/t/wp7605-what-is-minimum-functionality/30557>\
**Category:** WP Series\
**Created:** [September 5, 2023, 2:39am UTC](https://forum.sierrawireless.com/t/wp7605-what-is-minimum-functionality/30557 "2023-09-05T02:39:19Z")\
**Posts on this page:** 17\
**Page:** 1

<div class="post-metadata">

**Author:** ![xu-yongcheng](https://avatars.discourse-cdn.com/v4/letter/x/e9a140/32.png) [@xu-yongcheng](https://forum.sierrawireless.com/u/xu-yongcheng)\
**Post date:** [September 5, 2023, 2:39am UTC](https://forum.sierrawireless.com/t/wp7605-what-is-minimum-functionality/30557/1 "2023-09-05T02:39:19Z")

</div>

I have a problem with Minimum Functionality.  
After using the command “AT+CFUN=0”, the device enters the Minimum Functionality state, but does this have any impact on the operating efficiency of the device?  
I raise this question because it sometimes takes more time to execute “AT!GSTATUS?” after executing “AT+CFUN=0” than after executing “AT+CFUN=1”.

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [September 5, 2023, 3:08am UTC](https://forum.sierrawireless.com/t/wp7605-what-is-minimum-functionality/30557/2 "2023-09-05T03:08:04Z")

</div>

after executing AT+CFUN=0, there is no meaning to type AT!GSTATUS? as telecom stack is off.

---

<div class="post-metadata">

**Author:** ![xu-yongcheng](https://avatars.discourse-cdn.com/v4/letter/x/e9a140/32.png) [@xu-yongcheng](https://forum.sierrawireless.com/u/xu-yongcheng)\
**Post date:** [September 5, 2023, 3:18am UTC](https://forum.sierrawireless.com/t/wp7605-what-is-minimum-functionality/30557/3 "2023-09-05T03:18:12Z")

</div>

thank you for your answer!but I also want to know what it have done after executing “AT+CFUN=0” and “AT!GSTATUS?”, and why it takes more time to response the result. after executing “AT+CFUN=0”, the answer for " AT!GSTATUS?" is like this :  
!GSTATUS:  
Current Time: 5794 Temperature: 40  
Modem Mitigate Level: 0 ModemProc Mitigate Level: 0  
Reset Counter: 3 Mode: LOW POWER MODE

OK

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [September 5, 2023, 3:39am UTC](https://forum.sierrawireless.com/t/wp7605-what-is-minimum-functionality/30557/4 "2023-09-05T03:39:36Z")

</div>

at+cfun=0 is to turn off the telecom stack, and module will be enter low power mode as status in AT!GSTATUS.

Can you add the timestamp to show how much time is needed in your case for AT+CFUN=0 and AT!GSTATUS?

---

<div class="post-metadata">

**Author:** ![xu-yongcheng](https://avatars.discourse-cdn.com/v4/letter/x/e9a140/32.png) [@xu-yongcheng](https://forum.sierrawireless.com/u/xu-yongcheng)\
**Post date:** [September 5, 2023, 10:25am UTC](https://forum.sierrawireless.com/t/wp7605-what-is-minimum-functionality/30557/5 "2023-09-05T10:25:18Z")

</div>

sorry to keep you waiting! the longest time to wait the response of “AT!GSTATUS?” is about15 seconds.

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [September 5, 2023, 2:30pm UTC](https://forum.sierrawireless.com/t/wp7605-what-is-minimum-functionality/30557/6 "2023-09-05T14:30:28Z")

</div>

how to reproduce the issue?  
I don’t see problem with WP7605 with FW R17:

```auto

[2023-09-05 22:29:23.037] ati3
[2023-09-05 22:29:23.521] Manufacturer: Sierra Wireless, Incorporated
[2023-09-05 22:29:23.521] Model: WP7605
[2023-09-05 22:29:23.521] Revision: SWI9X07Y_02.28.03.05 000000 jenkins 2019/07/08 11:04:16
[2023-09-05 22:29:23.521] IMEI: 353532100012345
[2023-09-05 22:29:23.521] IMEI SV: 6
[2023-09-05 22:29:23.521] FSN: 2A917285012345
[2023-09-05 22:29:23.521] +GCAP: +CGSM
[2023-09-05 22:29:23.521] 
[2023-09-05 22:29:23.521] OK
[2023-09-05 22:29:25.149] at+cfun?
[2023-09-05 22:29:26.686] +CFUN: 1
[2023-09-05 22:29:26.686] 
[2023-09-05 22:29:26.686] OK
[2023-09-05 22:29:27.293] at+cfun=0
[2023-09-05 22:29:29.076] OK
[2023-09-05 22:29:36.526] at!gstatus?
[2023-09-05 22:29:38.465] !GSTATUS: 
[2023-09-05 22:29:38.465] Current Time: 129 Temperature: 34
[2023-09-05 22:29:38.465] Modem Mitigate Level: 0 ModemProc Mitigate Level: 0	
[2023-09-05 22:29:38.465] Reset Counter: 1 Mode: LOW POWER MODE 
[2023-09-05 22:29:38.465] 
[2023-09-05 22:29:38.465] OK

```

BTW, what is the meaning of typing AT!GSTATUS? after telecom stack is off?

---

<div class="post-metadata">

**Author:** ![xu-yongcheng](https://avatars.discourse-cdn.com/v4/letter/x/e9a140/32.png) [@xu-yongcheng](https://forum.sierrawireless.com/u/xu-yongcheng)\
**Post date:** [September 6, 2023, 1:15am UTC](https://forum.sierrawireless.com/t/wp7605-what-is-minimum-functionality/30557/7 "2023-09-06T01:15:29Z")

</div>

I don’t know the meaning , too. Maybe it’s not a good idea to typing AT!GSTATUS? when AT+CFUN=0.  
futhermore, it takes times to reproduce the issue, please type AT!GSTATUS? every 10 seconds. this phenomenon occurs by chance.

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [September 6, 2023, 1:20am UTC](https://forum.sierrawireless.com/t/wp7605-what-is-minimum-functionality/30557/8 "2023-09-06T01:20:25Z")

</div>

if there is no meaning to type AT!GSTATUS? when AT+CFUN=0, i don’t see the meaning to reproduce the problem

---

<div class="post-metadata">

**Author:** ![xu-yongcheng](https://avatars.discourse-cdn.com/v4/letter/x/e9a140/32.png) [@xu-yongcheng](https://forum.sierrawireless.com/u/xu-yongcheng)\
**Post date:** [September 6, 2023, 1:44am UTC](https://forum.sierrawireless.com/t/wp7605-what-is-minimum-functionality/30557/9 "2023-09-06T01:44:37Z")

</div>

but there is a answer for AT!GSTATUS? when AT+CFUN=0, not error. does it mean there are any meanings? and what I want to know is why it sometimes takes more time to execute “AT!GSTATUS?”, or could you give me some materials about this problem or about “there is no meaning to type AT!GSTATUS? when AT+CFUN=0”? I need these to prove this problem’s reason and advancing the maintanence. thank you.

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [September 6, 2023, 1:52am UTC](https://forum.sierrawireless.com/t/wp7605-what-is-minimum-functionality/30557/10 "2023-09-06T01:52:59Z")

</div>

I think you will always get Low power mode for aT!GSTATUS? during AT+CFUN=0, right?

---

<div class="post-metadata">

**Author:** ![xu-yongcheng](https://avatars.discourse-cdn.com/v4/letter/x/e9a140/32.png) [@xu-yongcheng](https://forum.sierrawireless.com/u/xu-yongcheng)\
**Post date:** [September 6, 2023, 2:01am UTC](https://forum.sierrawireless.com/t/wp7605-what-is-minimum-functionality/30557/11 "2023-09-06T02:01:35Z")

</div>

yes, we can get it from the interpretation for AT+CFUN=0 . but I can’t see any interpretation about what is the Low power mode.

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [September 6, 2023, 2:18am UTC](https://forum.sierrawireless.com/t/wp7605-what-is-minimum-functionality/30557/12 "2023-09-06T02:18:19Z")

</div>

probably you can search “Radio off” in the PTS to understand it

---

<div class="post-metadata">

**Author:** ![xu-yongcheng](https://avatars.discourse-cdn.com/v4/letter/x/e9a140/32.png) [@xu-yongcheng](https://forum.sierrawireless.com/u/xu-yongcheng)\
**Post date:** [September 6, 2023, 2:33am UTC](https://forum.sierrawireless.com/t/wp7605-what-is-minimum-functionality/30557/13 "2023-09-06T02:33:26Z")

</div>

ah, does Low power mode mean Airplane mode?

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [September 6, 2023, 2:37am UTC](https://forum.sierrawireless.com/t/wp7605-what-is-minimum-functionality/30557/14 "2023-09-06T02:37:14Z")

</div>

you can try this:

```auto
//set to flight mode

at+cfun=4
OK
at!gstatus?
!GSTATUS:
Current Time: 73 Temperature: 31
Modem Mitigate Level: 0 ModemProc Mitigate Level: 0
Reset Counter: 1 Mode: LOW POWER MODE

OK
at!pcinfo?
State: Low Power Mode
LPM voters - Temp:0, Volt:0, User:1, W_DISABLE:0, IMSWITCH:0, BIOS:0, LWM2M:0, OMADM:0, FOTA:0
LPM persistence - None

OK

```

but I have no idea what is the difference between AT+CFUN=0 and AT+CFUN=4

---

<div class="post-metadata">

**Author:** ![xu-yongcheng](https://avatars.discourse-cdn.com/v4/letter/x/e9a140/32.png) [@xu-yongcheng](https://forum.sierrawireless.com/u/xu-yongcheng)\
**Post date:** [September 6, 2023, 2:56am UTC](https://forum.sierrawireless.com/t/wp7605-what-is-minimum-functionality/30557/15 "2023-09-06T02:56:13Z")

</div>

yes, it seems like that there is no difference between AT+CFUN=0 and AT+CFUN=4.

```auto
AT+CFUN=4
OK
AT!GSTATUS?
!GSTATUS:
Current Time: 1450 Temperature: 39
Modem Mitigate Level: 0 ModemProc Mitigate Level: 0
Reset Counter: 3 Mode: LOW POWER MODE

OK
AT!PCINFO?
State: Low Power Mode
LPM voters - Temp:0, Volt:0, User:1, W_DISABLE:0, IMSWITCH:0, BIOS:0, LWM2M:0, OMADM:0, FOTA:0
LPM persistence - User:1

OK
AT+CFUN=0
OK
AT!GSTATUS?
!GSTATUS:
Current Time: 1496 Temperature: 39
Modem Mitigate Level: 0 ModemProc Mitigate Level: 0
Reset Counter: 3 Mode: LOW POWER MODE

OK
AT!PCINFO?
State: Low Power Mode
LPM voters - Temp:0, Volt:0, User:1, W_DISABLE:0, IMSWITCH:0, BIOS:0, LWM2M:0, OMADM:0, FOTA:0
LPM persistence - User:1

OK

```

and the Current Consumption under Airplane mode is only 25 mA, will it affect AT command processing efficiency?

---

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/jyijyi/32/4766_2.png) [@jyijyi](https://forum.sierrawireless.com/u/jyijyi)\
**Post date:** [September 6, 2023, 3:12am UTC](https://forum.sierrawireless.com/t/wp7605-what-is-minimum-functionality/30557/16 "2023-09-06T03:12:41Z")

</div>

no idea, you can make some test on this flight mode

---

<div class="post-metadata">

**Author:** ![xu-yongcheng](https://avatars.discourse-cdn.com/v4/letter/x/e9a140/32.png) [@xu-yongcheng](https://forum.sierrawireless.com/u/xu-yongcheng)\
**Post date:** [September 6, 2023, 5:16am UTC](https://forum.sierrawireless.com/t/wp7605-what-is-minimum-functionality/30557/17 "2023-09-06T05:16:20Z")

</div>

thank you for your patient answer. maybe I should find a way to ignore the long time spent on the response. 🤔
