# Wismo M1306B wipsoft install

**URL:** <https://forum.sierrawireless.com/t/wismo-m1306b-wipsoft-install/5621>\
**Category:** Open AT\
**Created:** [May 25, 2012, 2:17pm UTC](https://forum.sierrawireless.com/t/wismo-m1306b-wipsoft-install/5621 "2012-05-25T14:17:50Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![allomar1](https://avatars.discourse-cdn.com/v4/letter/a/e0b2c6/32.png) [@allomar1](https://forum.sierrawireless.com/u/allomar1)\
**Post date:** [May 25, 2012, 2:17pm UTC](https://forum.sierrawireless.com/t/wismo-m1306b-wipsoft-install/5621/1 "2012-05-25T14:17:50Z")

</div>

Hello everybody,  
We have acquired some M1306B modules and would like to use them to send data to our server.  
First af all, I know these are discontinnued models and there is no support and updates for them, but we’d like to use them if possible.  
The module will be connected to a microcontroller, which will connect to several sensors, via RS-232. For testing we are using a PC COM port and hyperterminal.  
The problem is they come with 652a09gg.Q2406A firmware and eDSoft-W302\_V3.04, as we have found using AT commands.  
We want to send data by http post requests, but if I understood the docs I read, the http stack is not implemented in edsoft, but in wipsoft.  
So here is the question, can we download a version of wipsoft suitable for our module and use the WIP AT commands?  
Which is the easier way to do what we want?

Thank you very much in advance.

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [May 25, 2012, 8:53pm UTC](https://forum.sierrawireless.com/t/wismo-m1306b-wipsoft-install/5621/2 "2012-05-25T20:53:49Z")

</div>

Yes WIP was certainly available for the M1306, and could do HTTP.

Whether you will be able to obtain it now is another matter…

---

<div class="post-metadata">

**Author:** ![allomar1](https://avatars.discourse-cdn.com/v4/letter/a/e0b2c6/32.png) [@allomar1](https://forum.sierrawireless.com/u/allomar1)\
**Post date:** [May 25, 2012, 10:23pm UTC](https://forum.sierrawireless.com/t/wismo-m1306b-wipsoft-install/5621/3 "2012-05-25T22:23:32Z")

</div>

> [@awneil](#):
>
> Yes WIP was certainly available for the M1306, and could do HTTP.
> 
> Whether you will be able to obtain it now is another matter…

Can anyone help on this?  
Should we find a wipsoft.dwl file anywhere or should we compile it from a Open AT SDK ?

Any help will be very wellcome