# Wippeerclose

**URL:** <https://forum.sierrawireless.com/t/wippeerclose/1759>\
**Category:** Open AT\
**Created:** [December 4, 2007, 5:09pm UTC](https://forum.sierrawireless.com/t/wippeerclose/1759 "2007-12-04T17:09:58Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![loicquatremare](https://avatars.discourse-cdn.com/v4/letter/l/a9a28c/32.png) [@loicquatremare](https://forum.sierrawireless.com/u/loicquatremare)\
**Post date:** [December 4, 2007, 5:09pm UTC](https://forum.sierrawireless.com/t/wippeerclose/1759/1 "2007-12-04T17:09:58Z")

</div>

Hello,

I’am currently develop an application based on a FASTRACK M1306B with Wipsoft 3.01. All AT command are sent through Hyperterminal.  
I can dial, send SMS, but my problem is :  
when I follow the example decribe in the WIP\_AT\_COMMANDS\_USER\_GUID\_V3.01 in order to send an e-mail(8.6 SMTP), after +WIPCREATE (I specified smtp server, user name and password) the modem answer OK then +WIPREADY: 6,1. But few second later the modem answer again with +WIPPEERCLOSE: 6, 1.  
It’s an unsollicited answer, but why?  
Someone have already had the same problem, or someone could help me?  
Thank you in advance, loic

PS : sorry for my english