# +WIPDATA indication issue

**URL:** <https://forum.sierrawireless.com/t/wipdata-indication-issue/5306>\
**Category:** Open AT\
**Created:** [October 26, 2011, 10:55am UTC](https://forum.sierrawireless.com/t/wipdata-indication-issue/5306 "2011-10-26T10:55:06Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![nghoanganh](https://avatars.discourse-cdn.com/v4/letter/n/a587f6/32.png) [@nghoanganh](https://forum.sierrawireless.com/u/nghoanganh)\
**Post date:** [October 26, 2011, 10:55am UTC](https://forum.sierrawireless.com/t/wipdata-indication-issue/5306/1 "2011-10-26T10:55:06Z")

</div>

Dear all,

I’m using Wismo228 module to implement GPRS feature. I have to use both online data mode and at mode ( for receiving SMS ). Then I swap between these modes. The problem that I meet is: There is only one time I can receive TCP package +WIPDATA indication when unit is in AT mode. I switch to online data mode, read the data and go back to AT mode. After that I don’t receive any +WIPDATA indication. Even there is coming data from the server. I test many time and all are same situation. Can anyone help me please ?  
I send the log below:

AT+WIPCFG=1  
OK

AT+WIPBR=1,6  
OK

AT+WIPBR=4,6,0  
OK

AT+WIPCREATE=2,5,“[www.teamtekbox.com](http://www.teamtekbox.com)”,30175  
OK

+WIPREADY: 2,5

AT+WIPDATA=2,5,2  
CONNECT

$FRLIN,anh,SMZ_50 \<-- login to server  
$FRSES,804_41

\< transfer data to server \>

+++ \<— switch to AT mode  
OK

…  
\<from the server I send “hello” \>  
+WIPDATA: 2,5,5 \<-- there is TCP package indication

AT+WIPDATA=2,5,2  
CONNECT

hello

+++ \<— switch to AT mode again  
OK

…  
\< from the server I send “hello” \>

AT+WIPDATA=2,5,2  
CONNECT

+WIPPEERCLOSE: 2,5  
OK

Best Regards,  
Nguyen Hoang Anh

---

<div class="post-metadata">

**Author:** ![lotam](https://avatars.discourse-cdn.com/v4/letter/l/958977/32.png) [@lotam](https://forum.sierrawireless.com/u/lotam)\
**Post date:** [October 27, 2011, 4:08am UTC](https://forum.sierrawireless.com/t/wipdata-indication-issue/5306/2 "2011-10-27T04:08:06Z")

</div>

Hi,  
Are you using outdated FW?  
Otherwise try the latest FW and check if it solves the problem.

Thx.  
L

---

<div class="post-metadata">

**Author:** ![nghoanganh](https://avatars.discourse-cdn.com/v4/letter/n/a587f6/32.png) [@nghoanganh](https://forum.sierrawireless.com/u/nghoanganh)\
**Post date:** [October 27, 2011, 4:29am UTC](https://forum.sierrawireless.com/t/wipdata-indication-issue/5306/3 "2011-10-27T04:29:37Z")

</div>

> [@lotam](#):
>
> Hi,  
> Are you using outdated FW?  
> Otherwise try the latest FW and check if it solves the problem.
> 
> Thx.  
> Lo

Dear lotam,

Thanks in advance. I have got the new firmware and try to upgrade it now.  
Will let you know the result.

Regards,  
Anh

---

<div class="post-metadata">

**Author:** ![lotam](https://avatars.discourse-cdn.com/v4/letter/l/958977/32.png) [@lotam](https://forum.sierrawireless.com/u/lotam)\
**Post date:** [October 27, 2011, 5:58am UTC](https://forum.sierrawireless.com/t/wipdata-indication-issue/5306/4 "2011-10-27T05:58:42Z")

</div>

Hi Anh,

You are welcome. Good luck and come back with a good news.  
🙂

L

---

<div class="post-metadata">

**Author:** ![nghoanganh](https://avatars.discourse-cdn.com/v4/letter/n/a587f6/32.png) [@nghoanganh](https://forum.sierrawireless.com/u/nghoanganh)\
**Post date:** [October 30, 2011, 3:57am UTC](https://forum.sierrawireless.com/t/wipdata-indication-issue/5306/5 "2011-10-30T03:57:41Z")

</div>

Dear,

I upgraded firmware L22\_00gg.WISMO218 281210 and the module worked as my expectation.  
Again thanks lotam too much : ).

Regards,  
Anh
