# WIP library problem with Q2686 **URL:** \ **Category:** Open AT\ **Created:** [March 12, 2007, 6:33pm UTC](https://forum.sierrawireless.com/t/wip-library-problem-with-q2686/1179 "2007-03-12T18:33:34Z")\ **Posts on this page:** 11\ **Page:** 1
**Author:** ![zicostar](https://avatars.discourse-cdn.com/v4/letter/z/59ef9b/32.png) [@zicostar](https://forum.sierrawireless.com/u/zicostar)\ **Post date:** [March 12, 2007, 6:33pm UTC](https://forum.sierrawireless.com/t/wip-library-problem-with-q2686/1179/1 "2007-03-12T18:33:34Z")
Hello boys and girls, I have a problem with running the InternetConnection sample with the Q2686 module. When I build it in RTE mode, I get the following error: … Link mingw\_InternetConnection\_H.bin … make: \*\*\* [make\_single\_bin] Error 1 rte\_wmwip\_2.0.0.2.0.lib(./rte/vc6/Release/st\_rand.obj)(.text[\_ngRandom]+0x25):U:\projet\gsmmi\in: undefined reference to `_allmul' rte_wmwip_2.0.0.2.0.lib(./rte/vc6/Release/st_rand.obj)(.text[_ngRandom]+0x33):U:\projet\gsmmi\in: undefined reference to`\_aullrem’ Done. Updating RTE kernel file… no generated DLL found… [wmmake error #1] Build error. If I build in Target mode, it can be built, but after downloading it on the module I get only an ERROR message, and not even the traces in the main function can be seen. I also encountered some strange problem when I build the QueryApp sample project including WIP 2.0.0.2.0 – it simply crashes when trying to link mingw\_QueryAPP\_H.bin, saying that “ld.exe” has encountered serious problems… But if I do not include WIP, it runs ok. Anybody has an idea? ---
**Author:** ![jacfry](https://avatars.discourse-cdn.com/v4/letter/j/b782af/32.png) [@jacfry](https://forum.sierrawireless.com/u/jacfry)\ **Post date:** [April 13, 2007, 1:01pm UTC](https://forum.sierrawireless.com/t/wip-library-problem-with-q2686/1179/2 "2007-04-13T13:01:17Z")
Same thing in OpenAT 3.13 and rte\_wmwip\_2.0.0.6.0.lib. Anybody solved this issue? ---
**Author:** ![optomation](https://avatars.discourse-cdn.com/v4/letter/o/8e8cbc/32.png) [@optomation](https://forum.sierrawireless.com/u/optomation)\ **Post date:** [April 15, 2007, 9:30pm UTC](https://forum.sierrawireless.com/t/wip-library-problem-with-q2686/1179/3 "2007-04-15T21:30:33Z")
Not exactly the same problem I’ve experienced but quite similar. In my case, it was caused by spurious files in the src subfolder of the project. If you have files there other than the .c source files, try to remove them, restart Open-AT and compile. Good luck! ---
**Author:** ![zicostar](https://avatars.discourse-cdn.com/v4/letter/z/59ef9b/32.png) [@zicostar](https://forum.sierrawireless.com/u/zicostar)\ **Post date:** [April 18, 2007, 7:59am UTC](https://forum.sierrawireless.com/t/wip-library-problem-with-q2686/1179/4 "2007-04-18T07:59:15Z")
Unfortunately this does not help, in my case there are no other files then the .c source files in the src folder. So the problem is still unresolved, as far as I know. ---
**Author:** ![alextb](https://avatars.discourse-cdn.com/v4/letter/a/dec6dc/32.png) [@alextb](https://forum.sierrawireless.com/u/alextb)\ **Post date:** [May 8, 2007, 7:07pm UTC](https://forum.sierrawireless.com/t/wip-library-problem-with-q2686/1179/5 "2007-05-08T19:07:03Z")
I’ve got the same problem! How can I solve that? Alex Teixeira Benfica [palpitedigital.com.br](http://www.palpitedigital.com.br) ---
**Author:** ![Pablo](https://avatars.discourse-cdn.com/v4/letter/p/ad7895/32.png) [@Pablo](https://forum.sierrawireless.com/u/Pablo)\ **Post date:** [May 11, 2007, 8:27pm UTC](https://forum.sierrawireless.com/t/wip-library-problem-with-q2686/1179/6 "2007-05-11T20:27:59Z")
Hi, I had the same problem once. Try running the “Re-build all (Target)” command in Make Targets tab (on Eclipse platform). If this solves your problem please let me know! Regards from Argentina 😉 Pablo. ---
**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\ **Post date:** [May 12, 2007, 8:44am UTC](https://forum.sierrawireless.com/t/wip-library-problem-with-q2686/1179/7 "2007-05-12T08:44:21Z")
> [@zicostar](#): > > in my case there are no other files then the .c source files in the src folder. Besure that you have no spaces in any of the file names! In particular, if you use Windows explorer to drag & drop ‘file.c’ it will give you ‘Copy of file.c’ - and that will mess up the Wavecom build system! (in fact, I think it causes 3 entries in the project - ‘copy’, ‘of’, and ‘file.c’!) ---
**Author:** ![zicostar](https://avatars.discourse-cdn.com/v4/letter/z/59ef9b/32.png) [@zicostar](https://forum.sierrawireless.com/u/zicostar)\ **Post date:** [May 24, 2007, 2:55pm UTC](https://forum.sierrawireless.com/t/wip-library-problem-with-q2686/1179/8 "2007-05-24T14:55:38Z")
Thank you all for the tips! Unfortunately none of them worked, so the problem is still unresolved. Pablo: > [@](#): > > Try running the “Re-build all (Target)” command in Make Targets tab (on Eclipse platform). I know, it does compile in Target mode, but I want to use it in RTE mode. (“Build(RTE)”) awneil: > [@](#): > > Besure that you have no spaces in any of the file names! I’m trying to compile a sample from the OpenAT CD, called InternetConnection, so the file names are OK. ---
**Author:** ![stephane](https://avatars.discourse-cdn.com/v4/letter/s/dfb087/32.png) [@stephane](https://forum.sierrawireless.com/u/stephane)\ **Post date:** [June 1, 2007, 8:40am UTC](https://forum.sierrawireless.com/t/wip-library-problem-with-q2686/1179/9 "2007-06-01T08:40:41Z")
> [@zicostar](#): > > Thank you all for the tips! > > Unfortunately none of them worked, so the problem is still unresolved. > > Pablo: > > > [@](#): > > > > Try running the “Re-build all (Target)” command in Make Targets tab (on Eclipse platform). > > I know, it does compile in Target mode, but I want to use it in RTE mode. > (“Build(RTE)”) > > awneil: > > > [@](#): > > > > Besure that you have no spaces in any of the file names! > > I’m trying to compile a sample from the OpenAT CD, called InternetConnection, so the file names are OK. I’ve exactely the same problem and “Re-build all” doesn’t solve my problem. I use the programme Ping\_Gprs provided with the open at’ s CD ---
**Author:** ![tobias](https://avatars.discourse-cdn.com/v4/letter/t/c67d28/32.png) [@tobias](https://forum.sierrawireless.com/u/tobias)\ **Post date:** [June 1, 2007, 10:45am UTC](https://forum.sierrawireless.com/t/wip-library-problem-with-q2686/1179/10 "2007-06-01T10:45:59Z")
It’s a known problem that you can’t make WIP applications with RTE target with Eclipse (at least it is listed as such in the last release notes I received). ---
**Author:** ![afaurep](https://avatars.discourse-cdn.com/v4/letter/a/9d8465/32.png) [@afaurep](https://forum.sierrawireless.com/u/afaurep)\ **Post date:** [June 15, 2007, 3:38pm UTC](https://forum.sierrawireless.com/t/wip-library-problem-with-q2686/1179/11 "2007-06-15T15:38:51Z")
Hello, in fact, i have the same problem that i describe here : [wavecom.com/modules/movie/sc … =5341#5341](http://www.wavecom.com/modules/movie/scenes/forums/viewtopic.php?p=5341#5341) But, if it is written in the last realease note… ☹