# WIP embedded module

**URL:** <https://forum.sierrawireless.com/t/wip-embedded-module/6187>\
**Category:** Legacy FX/FXT series\
**Created:** [February 28, 2013, 12:19pm UTC](https://forum.sierrawireless.com/t/wip-embedded-module/6187 "2013-02-28T12:19:55Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![vicesbur](https://avatars.discourse-cdn.com/v4/letter/v/f05b48/32.png) [@vicesbur](https://forum.sierrawireless.com/u/vicesbur)\
**Post date:** [February 28, 2013, 12:19pm UTC](https://forum.sierrawireless.com/t/wip-embedded-module/6187/1 "2013-02-28T12:19:55Z")

</div>

Hello,

I am using the WIP embedded module inside a Fastrack Modem. I am using a GPRS bearer and a private APN, therefore the modem gets an static mobile IP address. The thing is everytime the modem powers off I need to reconfigure it again with the corresponding AT commands (AT+WIPCFG, AT+WIPBR…).

How can I save the configuration so the bearer, the APN name and so on do not delete after powering off the modem?

Thank you in advance.

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [February 28, 2013, 1:10pm UTC](https://forum.sierrawireless.com/t/wip-embedded-module/6187/2 "2013-02-28T13:10:39Z")

</div>

Never a good idea to just re-post the same question - especially when you have already received replies:

[https://forum.sierrawireless.com/t/saving-configuration/6172/1](https://forum.sierrawireless.com/t/saving-configuration/6172/1)

Better to keep with the original thread, and provide further inpuut…