# WIP command **URL:** \ **Category:** Open AT\ **Created:** [July 26, 2008, 8:44am UTC](https://forum.sierrawireless.com/t/wip-command/2368 "2008-07-26T08:44:25Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![abelgaius](https://avatars.discourse-cdn.com/v4/letter/a/13edae/32.png) [@abelgaius](https://forum.sierrawireless.com/u/abelgaius)\ **Post date:** [July 26, 2008, 8:44am UTC](https://forum.sierrawireless.com/t/wip-command/2368/1 "2008-07-26T08:44:25Z")
I am using WIp AT commands for connecting TCP client to sever using a external microcontroller. Kindly suggests me the WP commands for connecting as TCP client . I have already triend the comand s given in wavecom PDF example given in DOC WM\_DEV\_OAT\_UGD\_024. ---
**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\ **Post date:** [July 26, 2008, 8:53am UTC](https://forum.sierrawireless.com/t/wip-command/2368/2 "2008-07-26T08:53:05Z")
> [@abelgaius](#): > > I have already triend the comand s given in wavecom PDF example given in DOC So why do you want different commands? ---
**Author:** ![abelgaius](https://avatars.discourse-cdn.com/v4/letter/a/13edae/32.png) [@abelgaius](https://forum.sierrawireless.com/u/abelgaius)\ **Post date:** [September 20, 2008, 11:33am UTC](https://forum.sierrawireless.com/t/wip-command/2368/3 "2008-09-20T11:33:09Z")
well I have observed in Q24plus module that when evr I am giving wip command at+wipdata=2,1,1. I have to get a connect response from the server. Sometimes even after geting the connect response from the module still I am not getting any data in the server. Also sometime the network goes low and immediately the wipdata command fils and again to connect it takes a long time eventually my gPS data packets i send is at a ver y slow rate . kindly help me …