# Wip\_bev\_conn\_failed

**URL:** <https://forum.sierrawireless.com/t/wip-bev-conn-failed/2066>\
**Category:** Open AT\
**Created:** [April 4, 2008, 6:47am UTC](https://forum.sierrawireless.com/t/wip-bev-conn-failed/2066 "2008-04-04T06:47:33Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![sergiulungu](https://avatars.discourse-cdn.com/v4/letter/s/ba8739/32.png) [@sergiulungu](https://forum.sierrawireless.com/u/sergiulungu)\
**Post date:** [April 4, 2008, 6:47am UTC](https://forum.sierrawireless.com/t/wip-bev-conn-failed/2066/1 "2008-04-04T06:47:33Z")

</div>

I have an application that works just fine with a sim card from one operator if i insert a sim card from another mobile operator i get this error WIP\_BEV\_CONN\_FAILED in the bearer handler although at+cgreg returns 0,1 meaning i have gprs (i set up the apn, user and password right).What could be the problem ?

---

<div class="post-metadata">

**Author:** ![trthaithong](https://avatars.discourse-cdn.com/v4/letter/t/22d042/32.png) [@trthaithong](https://forum.sierrawireless.com/u/trthaithong)\
**Post date:** [April 7, 2008, 9:04am UTC](https://forum.sierrawireless.com/t/wip-bev-conn-failed/2066/2 "2008-04-07T09:04:03Z")

</div>

Hi sergiulungu,  
With the simcard of new operator, can you make a call and SMS? Does the flash led blink?  
ttt

---

<div class="post-metadata">

**Author:** ![sergiulungu](https://avatars.discourse-cdn.com/v4/letter/s/ba8739/32.png) [@sergiulungu](https://forum.sierrawireless.com/u/sergiulungu)\
**Post date:** [April 22, 2008, 5:43pm UTC](https://forum.sierrawireless.com/t/wip-bev-conn-failed/2066/3 "2008-04-22T17:43:23Z")

</div>

well i haven’t tried calling or sending sms … but i get the at+cgreg=0,1 after the right pin is entered this means that i have gprs no? Can the bearer still have problems ?

---

<div class="post-metadata">

**Author:** ![trthaithong](https://avatars.discourse-cdn.com/v4/letter/t/22d042/32.png) [@trthaithong](https://forum.sierrawireless.com/u/trthaithong)\
**Post date:** [April 23, 2008, 4:33am UTC](https://forum.sierrawireless.com/t/wip-bev-conn-failed/2066/4 "2008-04-23T04:33:10Z")

</div>

Hi Sergiulungu,  
I am not sure that the bearer still have problem or not. Why don’t you try with WIPSoft for GPRS connection, Maybe you will find out which step is error? It is just a suggestion.  
ttt
