# wip\_bearerStart is returning WIP\_BERR\_OK\_INPROGRESS

**URL:** <https://forum.sierrawireless.com/t/wip-bearerstart-is-returning-wip-berr-ok-inprogress/8735>\
**Category:** Open AT\
**Created:** [August 20, 2016, 6:48am UTC](https://forum.sierrawireless.com/t/wip-bearerstart-is-returning-wip-berr-ok-inprogress/8735 "2016-08-20T06:48:23Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ganeshkimidi](https://avatars.discourse-cdn.com/v4/letter/g/74df32/32.png) [@ganeshkimidi](https://forum.sierrawireless.com/u/ganeshkimidi)\
**Post date:** [August 20, 2016, 6:48am UTC](https://forum.sierrawireless.com/t/wip-bearerstart-is-returning-wip-berr-ok-inprogress/8735/1 "2016-08-20T06:48:23Z")

</div>

Hi every one,  
I am trying to start a UART bear but it is returning WIP\_BERR\_OK\_INPROGRESS after 2 minutes i am getting WIP\_BEV\_CONN\_FAILED event.

Please find below followed steps for stating UART bearer.

ret = wip\_netInitOpts ( WIP\_NET\_OPT\_END ); //getting success

bearerRet = wip\_bearerOpen ( &br, “UART1”, cbEvhBearer, NULL ); //getting success

bearerRet = wip\_bearerSetOpts ( br,  
WIP\_BOPT\_LOGIN, PPP\_USER,  
WIP\_BOPT\_PASSWORD, PPP\_PASSWORD,  
WIP\_BOPT\_IP\_ADDR, localAddr,  
WIP\_BOPT\_IP\_DST\_ADDR, destAddr,  
WIP\_BOPT\_END ); //getting success

bearerRet = wip\_bearerStart ( br ); // Returning WIP\_BERR\_OK\_INPROGRESS.  
After 2 minutes i am getting WIP\_BEV\_CONN\_FAILED event.

I am struggling this issue last 1 month but still i am not able to resolve it. Please give me some suggestions it would be really helpful to me. Thanks for advance.

---

<div class="post-metadata">

**Author:** ![ganeshkimidi](https://avatars.discourse-cdn.com/v4/letter/g/74df32/32.png) [@ganeshkimidi](https://forum.sierrawireless.com/u/ganeshkimidi)\
**Post date:** [August 20, 2016, 6:49am UTC](https://forum.sierrawireless.com/t/wip-bearerstart-is-returning-wip-berr-ok-inprogress/8735/2 "2016-08-20T06:49:32Z")

</div>

I am working on SL8082BTA and firmware 6.54.1.A1.