# wip\_bearerOpen with WCDMA on SL808x

**URL:** <https://forum.sierrawireless.com/t/wip-beareropen-with-wcdma-on-sl808x/6831>\
**Category:** Open AT\
**Created:** [October 31, 2013, 1:56am UTC](https://forum.sierrawireless.com/t/wip-beareropen-with-wcdma-on-sl808x/6831 "2013-10-31T01:56:14Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![yyiu002](https://avatars.discourse-cdn.com/v4/letter/y/e9bcb4/32.png) [@yyiu002](https://forum.sierrawireless.com/u/yyiu002)\
**Post date:** [October 31, 2013, 1:56am UTC](https://forum.sierrawireless.com/t/wip-beareropen-with-wcdma-on-sl808x/6831/1 "2013-10-31T01:56:14Z")

</div>

Hi all,  
Is it possible to use wip\_bearerOpen and wip\_bearerSetOpts to set up IP network with WCDMA as bearer on a SL808X module?  
With GPRS it works OK, and haven’t tried GSM dialling.

Thanks

---

<div class="post-metadata">

**Author:** ![Rex\_alex](https://avatars.discourse-cdn.com/v4/letter/r/73ab20/32.png) [@Rex\_alex](https://forum.sierrawireless.com/u/Rex_alex)\
**Post date:** [November 28, 2013, 10:50am UTC](https://forum.sierrawireless.com/t/wip-beareropen-with-wcdma-on-sl808x/6831/2 "2013-11-28T10:50:41Z")

</div>

Hi,

Through WIP APIs, there is no option to set the WCDMA bearer. Will keep you posted if i’ll get some info.

Thanks

---

<div class="post-metadata">

**Author:** ![Rex\_alex](https://avatars.discourse-cdn.com/v4/letter/r/73ab20/32.png) [@Rex\_alex](https://forum.sierrawireless.com/u/Rex_alex)\
**Post date:** [December 12, 2013, 1:12pm UTC](https://forum.sierrawireless.com/t/wip-beareropen-with-wcdma-on-sl808x/6831/3 "2013-12-12T13:12:16Z")

</div>

Hi,

I tested this. The bearer is not supported. You should get an error “WIP\_BERR\_NO\_DEV” which means ‘The device does not exist’.

Thanks
