# Wavecom fastrack wipcreate error **URL:** \ **Category:** Open AT\ **Created:** [June 23, 2011, 9:08am UTC](https://forum.sierrawireless.com/t/wavecom-fastrack-wipcreate-error/5112 "2011-06-23T09:08:19Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![bukmun](https://avatars.discourse-cdn.com/v4/letter/b/e68b1a/32.png) [@bukmun](https://forum.sierrawireless.com/u/bukmun)\ **Post date:** [June 23, 2011, 9:08am UTC](https://forum.sierrawireless.com/t/wavecom-fastrack-wipcreate-error/5112/1 "2011-06-23T09:08:19Z")
hi, I have wavecom fastrack M1306B with firmware version 6.57. I want to get the html code from [www.google.com](http://www.google.com), and I try this at command at+wopen=1 OK at+cmee=1 OK at+wipcfg=1 OK at+wipbr=1,6 OK at+wipbr=2,6,11,“[www.indosat-m3.net](http://www.indosat-m3.net)” OK at+wipbr=2,6,0,“gprs” OK at+wipbr=2,6,1,“im3” OK at+wipbr=4,6,0 OK at+wipcreate=? OK at+wipcreate=5,1,“[http://www.google.com](http://www.google.com)”,"","" +CME ERROR: 834 at+wipcreate=5,1,“[http://www.google.com](http://www.google.com)”,80,"","" +CME ERROR: 834 Anyone knows about that problem? because I’ve try this for 3 days and I’ve got stuck. I don’t know what the error means. ---
**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\ **Post date:** [June 23, 2011, 9:38am UTC](https://forum.sierrawireless.com/t/wavecom-fastrack-wipcreate-error/5112/2 "2011-06-23T09:38:04Z")
> [@bukmun](#): > > I don’t know what the error means. Have you looked-up the error code in the Manual ❓ ---
**Author:** ![bukmun](https://avatars.discourse-cdn.com/v4/letter/b/e68b1a/32.png) [@bukmun](https://forum.sierrawireless.com/u/bukmun)\ **Post date:** [June 24, 2011, 12:24am UTC](https://forum.sierrawireless.com/t/wavecom-fastrack-wipcreate-error/5112/3 "2011-06-24T00:24:59Z")
Thank you for your response yes I have. it said “not implemented”. Then, what should I do? ---
**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\ **Post date:** [June 24, 2011, 7:32am UTC](https://forum.sierrawireless.com/t/wavecom-fastrack-wipcreate-error/5112/4 "2011-06-24T07:32:18Z")
The M1306B has been obsolete for many years, and the firmware version 6.57 is similarly out-of-date. Are you sure that you are using the correct documentation version for that firmware version? ---
**Author:** ![bukmun](https://avatars.discourse-cdn.com/v4/letter/b/e68b1a/32.png) [@bukmun](https://forum.sierrawireless.com/u/bukmun)\ **Post date:** [June 24, 2011, 9:55am UTC](https://forum.sierrawireless.com/t/wavecom-fastrack-wipcreate-error/5112/5 "2011-06-24T09:55:11Z")
I’m not sure. here is the link [cse.dmu.ac.uk/~eg/tele/wipat.pdf](http://www.cse.dmu.ac.uk/~eg/tele/wipat.pdf) So, could I still use this modem and just update the firmware? do you know about the firmware that compatible with this modem? thanks ---
**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\ **Post date:** [June 24, 2011, 11:06am UTC](https://forum.sierrawireless.com/t/wavecom-fastrack-wipcreate-error/5112/6 "2011-06-24T11:06:41Z")
> [@bukmun](#): > > So, could I … just update the firmware? No - I think you already have the last version available for that hardware. For a novice, it’s usually best to start with a current, supported product to learn on! What is your objective here? ---
**Author:** ![bukmun](https://avatars.discourse-cdn.com/v4/letter/b/e68b1a/32.png) [@bukmun](https://forum.sierrawireless.com/u/bukmun)\ **Post date:** [June 27, 2011, 12:53am UTC](https://forum.sierrawireless.com/t/wavecom-fastrack-wipcreate-error/5112/7 "2011-06-27T00:53:55Z")
thank you for your help, I just want to open the website or html code using microcontroller. do you have any idea? ---
**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\ **Post date:** [June 27, 2011, 7:00am UTC](https://forum.sierrawireless.com/t/wavecom-fastrack-wipcreate-error/5112/8 "2011-06-27T07:00:15Z")
> [@bukmun](#): > > do you have any idea? Does your modem have the necessary “Commercial Features” enabled for the higher-level protocols like HTTP? > [@FAQ forum/wiki?](https://forum.sierrawireless.com/t/faq-forum-wiki/3491/1): > > Hiya, Does anyboy else think that it would be a good idea to have a FAQ area on either the Forum or Developer’s website? I’ve noticed that the same questions are asked (and answered) over and over again. Topics like I can’t find the SDK on the Wavecom website How do I download firmware to the Wavecom Supreme using DWLWin are just two that occur off the top of my head. There’s an absolute wealth of info in the forum now, and it would probably be a good idea to abstract the common issues out… > [@FAQ forum/wiki?](https://forum.sierrawireless.com/t/faq-forum-wiki/3491/1): > > Hiya, Does anyboy else think that it would be a good idea to have a FAQ area on either the Forum or Developer’s website? I’ve noticed that the same questions are asked (and answered) over and over again. Topics like I can’t find the SDK on the Wavecom website How do I download firmware to the Wavecom Supreme using DWLWin are just two that occur off the top of my head. There’s an absolute wealth of info in the forum now, and it would probably be a good idea to abstract the common issues out… ---
**Author:** ![bukmun](https://avatars.discourse-cdn.com/v4/letter/b/e68b1a/32.png) [@bukmun](https://forum.sierrawireless.com/u/bukmun)\ **Post date:** [June 30, 2011, 7:03am UTC](https://forum.sierrawireless.com/t/wavecom-fastrack-wipcreate-error/5112/9 "2011-06-30T07:03:35Z")
Thank you very much for your reply and your help. I think the problem is my modem not supported with HTTP protocols. I’ve searched in this forum, and I’ve found that we can get the html code using TCP protocols. so I tried this at command at+wipcreate=2,1,“74.125.71.147”,80 //connect with [google.com](http://google.com) OK +WIPREADY 2,1 at+wipdata=2,1,1 CONNECT After that, a black heart comes after a moment and the modem didn’t respond anymore. You know what’s the problem? ---
**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\ **Post date:** [June 30, 2011, 7:07am UTC](https://forum.sierrawireless.com/t/wavecom-fastrack-wipcreate-error/5112/10 "2011-06-30T07:07:13Z")
> [@bukmun](#): > > we can get the html code using TCP protocols. But then you have to handle the TCP protocols directly, and use that to implement your own HTTP client… ---
**Author:** ![bukmun](https://avatars.discourse-cdn.com/v4/letter/b/e68b1a/32.png) [@bukmun](https://forum.sierrawireless.com/u/bukmun)\ **Post date:** [June 30, 2011, 7:50am UTC](https://forum.sierrawireless.com/t/wavecom-fastrack-wipcreate-error/5112/11 "2011-06-30T07:50:09Z")
I just need the html code on my hyperterminal. After the CONNECT respond, how can I get the html code? some people said that we have to send “GET”, but it didn’t work. ---
**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\ **Post date:** [June 30, 2011, 8:19am UTC](https://forum.sierrawireless.com/t/wavecom-fastrack-wipcreate-error/5112/12 "2011-06-30T08:19:53Z")
> [@bukmun](#): > > some people said that we have to send “GET”, but it didn’t work. So why didn’t you ask those people to explain exactly what they meant? Again, using a “raw” TCP connection means that you have to implement the HTTP protocol yourself - so, what “those people” said means that you need to send a valid HTTP ‘GET’ Request. And, of course, you will have to handle the HTTP response to that request. Time to start reading-up on HTTP, then! eg, [jmarshall.com/easy/http/](http://www.jmarshall.com/easy/http/) ---
**Author:** ![admir](https://avatars.discourse-cdn.com/v4/letter/a/bcef8e/32.png) [@admir](https://forum.sierrawireless.com/u/admir)\ **Post date:** [December 11, 2012, 4:29pm UTC](https://forum.sierrawireless.com/t/wavecom-fastrack-wipcreate-error/5112/13 "2012-12-11T16:29:29Z")
> [@bukmun](#): > > Thank you very much for your reply and your help. > > I think the problem is my modem not supported with HTTP protocols. > I’ve searched in this forum, and I’ve found that we can get the html code using TCP protocols. > so I tried this at command > > at+wipcreate=2,1,“74.125.71.147”,80 //connect with [google.com](http://google.com) > OK > > +WIPREADY 2,1 > at+wipdata=2,1,1 > CONNECT > > After that, a black heart comes after a moment and the modem didn’t respond anymore. > You know what’s the problem? Hi all, I have the same problem with my modem (Airlink Fastrack Xtend FX009). Trying to establish TCP client socket to my server (on port 80) using putty. Everything works fine until I type at+wipdata =2,1,1 command. After that I get ‘CONNECT’ reply and the modem stops responding (no black heart). I can’t send anything to it (can’t type anything in terminal), and it is not sending back anything also. I have to restart it after this. I get connected to the internet, I am able to ping google and every other server. (My GSM provider also charges me every time I connect to the internet). Any suggestions?