# Unable to make voice call from adl\_callSetup()

**URL:** <https://forum.sierrawireless.com/t/unable-to-make-voice-call-from-adl-callsetup/3175>\
**Category:** Open AT\
**Created:** [April 29, 2009, 12:02pm UTC](https://forum.sierrawireless.com/t/unable-to-make-voice-call-from-adl-callsetup/3175 "2009-04-29T12:02:45Z")\
**Posts on this page:** 19\
**Page:** 1

<div class="post-metadata">

**Author:** ![tomb](https://avatars.discourse-cdn.com/v4/letter/t/c37758/32.png) [@tomb](https://forum.sierrawireless.com/u/tomb)\
**Post date:** [April 29, 2009, 12:02pm UTC](https://forum.sierrawireless.com/t/unable-to-make-voice-call-from-adl-callsetup/3175/1 "2009-04-29T12:02:45Z")

</div>

Hello,

I am using function adl\_callSetup(“50198\*\*\*”,ADL\_CALL\_MODE\_VOICE) to make a voice call or data call:  
Function return OK, but I cannot call anoter phone number:

I subscribe to adl\_callSubscribe(MyCallHandler) to see what’s going on… And I get:

> [@](#):
>
> at+wopen=1  
> OK  
> OK, Data phone call has been succeed  
> ADL\_CALL\_EVENT\_NEW\_ID  
> ADL\_CALL\_EVENT\_NO\_CARRIER  
> ADL\_CALL\_EVENT\_RELEASE\_ID

What am I doing wrong? Am I missing something before calling adl\_callSetup()?

The code is below:

```auto
const u16 wm_apmCustomStackSize = 1024;

s8 ret_value;

s8 MyCallHandler(u16 Event, u32 Call_ID)
{
    switch (Event)
    {
    case ADL_CALL_EVENT_RING_DATA:
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_RING_DATA\n\r");
           //adl_callAnswer();
      break;
    case ADL_CALL_EVENT_ANSWER_OK: 
        adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_ANSWER_OK\n\r");
    //V24Handle = adl_fcmSubscribe ( USED_FLOW, V24CtrlHandler, V24DataHandler );
      break;     
    case ADL_CALL_EVENT_RING_VOICE:
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_RING_VOICE\n\r");
      break;     
      case ADL_CALL_EVENT_NEW_ID:
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_NEW_ID\n\r");          
      break;
      case ADL_CALL_EVENT_RELEASE_ID:
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_RELEASE_ID\n\r");
      break;

      case ADL_CALL_EVENT_ALERTING:

           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_ALERTING\n\r");
      break;
      case ADL_CALL_EVENT_NO_CARRIER:
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_NO_CARRIER\n\r");
      break;
      case ADL_CALL_EVENT_NO_ANSWER:
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_NO_ANSWER\n\r");
      break;
      case ADL_CALL_EVENT_BUSY:
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_BUSY\n\r");
      break;
      case ADL_CALL_EVENT_SETUP_OK:
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_SETUP_OK\n\r");
      break;
      case ADL_CALL_EVENT_HANGUP_OK:
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_HANGUP_OK\n\r");
      break;
      case ADL_CALL_EVENT_SETUP_OK_FROM_EXT:
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_SETUP_OK_FROM_EXT\n\r");
      break;
      case ADL_CALL_EVENT_ANSWER_OK_FROM_EXT:
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_ANSWER_OK_FROM_EXT\n\r");
      break;
      case ADL_CALL_EVENT_HANGUP_OK_FROM_EXT:
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_HANGUP_OK_FROM_EXT\n\r");
      break;
      case ADL_CALL_EVENT_AUDIO_OPENNED:
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_AUDIO_OPENNED\n\r");
      break;
      case ADL_CALL_EVENT_ANSWER_OK_AUTO:
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_ANSWER_OK_AUTO\n\r");
      break;
      case ADL_CALL_EVENT_RING_GPRS:
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_RING_GPRS\n\r");
      break;
      case ADL_CALL_EVENT_SETUP_FROM_EXT:
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_SETUP_FROM_EXT\n\r");
      break;
      case ADL_CALL_EVENT_SETUP_ERROR_NO_SIM:
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_SETUP_ERROR_NO_SIM\n\r");
      break;
      case ADL_CALL_EVENT_SETUP_ERROR_PIN_NOT_READY:
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_SETUP_ERROR_PIN_NOT_READY\n\r");
      break;
      case ADL_CALL_EVENT_SETUP_ERROR:
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_SETUP_ERROR\n\r");
      break;
      case ADL_CALL_EVENT_CIEV:
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_CIEV\n\r");
      break;
      case ADL_CALL_EVENT_DTR_RELEASE:
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_DTR_RELEASE\n\r");
      break;
    }     
}

/ *************************************************************************** /
/* Function : adl_main */
/*-------------------------------------------------------------------------*/
/* Object : Customer application initialisation */
/* */
/*-------------------------------------------------------------------------*/
/* Variable Name |IN |OUT|GLB| Utilisation */
/*--------------------+---+---+---+----------------------------------------*/
/* InitType | | | | Application start mode reason */
/*--------------------+---+---+---+----------------------------------------*/
/ *************************************************************************** /
void adl_main ( adl_InitType_e InitType )
{
    //ret_value = adl_callSetup("24346***",ADL_CALL_MODE_DATA);

    ret_value = adl_callSetup("50198***",ADL_CALL_MODE_VOICE);//

    if (ret_value == OK )
    adl_atSendResponse ( ADL_AT_UNS, "OK, Data phone call has been succeed\32\r\n" );
    else if (ret_value == ADL_RET_ERR_PARAM )
    adl_atSendResponse ( ADL_AT_UNS, "Some errors while calling ADL_RET_ERR_PARAM \32\r\n" );
    else
    adl_atSendResponse ( ADL_AT_UNS, "ADL_RET_ERR_SERVICE_LOCKED \32\r\n" );

    adl_callSubscribe(MyCallHandler);
}
```

Thanks in advance for help.  
Tom

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [April 29, 2009, 12:16pm UTC](https://forum.sierrawireless.com/t/unable-to-make-voice-call-from-adl-callsetup/3175/2 "2009-04-29T12:16:26Z")

</div>

What happens if you try to call those numbers “manually” with AT commands?

What clearing cause do you see with AT+CEER ?

---

<div class="post-metadata">

**Author:** ![tomb](https://avatars.discourse-cdn.com/v4/letter/t/c37758/32.png) [@tomb](https://forum.sierrawireless.com/u/tomb)\
**Post date:** [April 29, 2009, 2:40pm UTC](https://forum.sierrawireless.com/t/unable-to-make-voice-call-from-adl-callsetup/3175/3 "2009-04-29T14:40:07Z")

</div>

Well, I haven’t try with AT command, that will be next step.

When I type: at+ceer I got following error:

> [@](#):
>
> at+ceer  
> +CEER: Error 0

According to AT\_command\_Interface\_Guide error is defined:

> [@](#):
>
> : call release cause (please refer to section “failure cause from  
> GSM 24.08 recommendation” in Appendix)

So in Appendix I found only this:

> [@](#):
>
> Specific Failure Cause for +CEER  
> Cause value Diagnostic  
> 240 FDN is active and number is not in FDN  
> 241 Call operation not allowed  
> 252 Call barring on outgoing calls  
> 253 Call barring on incoming calls  
> 254 Call impossible  
> 255 Lower layer failure

Where can I find Error 0?

Later I have tried:

> [@](#):
>
> atd501985\*\*  
> +WIND: 5,1
> 
> NO ANSWER
> 
> +WIND: 6,1  
> at  
> OK  
> at+ceer  
> +CEER: Error 19

Or 19? What does it mean?

---

<div class="post-metadata">

**Author:** ![tomb](https://avatars.discourse-cdn.com/v4/letter/t/c37758/32.png) [@tomb](https://forum.sierrawireless.com/u/tomb)\
**Post date:** [April 29, 2009, 6:51pm UTC](https://forum.sierrawireless.com/t/unable-to-make-voice-call-from-adl-callsetup/3175/4 "2009-04-29T18:51:32Z")

</div>

ok, seems that Wavecom documentation contains wrong information… On page 55 VOLUME2 in 12.9.3 Parameters and Defined Values should be GSM 04.08

Anyway I got GSM 04.08 with all codes from 0 - 127.

But after I have type: at+cfun=1

I got error 226 that is over the range of values defined in GSM 04.08.  
Where is the definition for this Cause No.?

Where those numbers are taken from ?

> [@](#):
>
> 240 FDN is active and number is not in FDN  
> 241 Call operation not allowed  
> 252 Call barring on outgoing calls  
> 253 Call barring on incoming calls  
> 254 Call impossible  
> 255 Lower layer failure

When I try to make a call using AT commands still I don’t receive a ring indication on my mobile phone:

> [@](#):
>
> at+cmee=1  
> OK  
> at+wind=63  
> OK  
> at+cpin?  
> +CPIN: READY  
> atd501985\*\*  
> +WIND: 5,1
> 
> NO ANSWER
> 
> +WIND: 6,1  
> at+ceer  
> +CEER: Error 19  
> OK

What am I doing wrong?  
Example has been taken from APPENDIXES (Page 21):

> [@](#):
>
> 2.2 Examples where a Voice Call is Originated  
> 2.2.1 When the ME is powered on and the SIM PIN has been entered  
> AT+CMEE=1 Enable the reporting of mobile equipment errors  
> OK  
> AT+WIND=63 Ask to display the general indications.  
> OK  
> AT+CPIN? Is ME requiring a password?  
> +CPIN: READY product is ready  
> ATD0607103543; Make a voice call  
> +WIND: 5,1 Indication of call  
> +WIND: 2 Remote party is ringing.  
> OK Call setup was successful  
> Conversation…  
> ATH Release the call  
> OK

Thanks in advance for answers.  
Tom

---

<div class="post-metadata">

**Author:** ![davidc](https://avatars.discourse-cdn.com/v4/letter/d/a183cd/32.png) [@davidc](https://forum.sierrawireless.com/u/davidc)\
**Post date:** [April 30, 2009, 1:56am UTC](https://forum.sierrawireless.com/t/unable-to-make-voice-call-from-adl-callsetup/3175/5 "2009-04-30T01:56:50Z")

</div>

Hiya,

It’s my understanding that the Wavecom modem tries to make the call over the DATA bearer by default. If your mobile doesn’t have a DATA number (or your telco doesn’t support DATA calls to a mobile), the mobile won’t answer.

To force the Wavecom modem to make a call over the VOICE bearer, add a semicolon (😉 to the end of the number in the ATD command.

i.e. ATD12345678;

and see if that connects to your mobile.

Also, have a look a the BEARER commands in the AT command manual.

Let us know how you get on.

ciao, Dave

---

<div class="post-metadata">

**Author:** ![tomb](https://avatars.discourse-cdn.com/v4/letter/t/c37758/32.png) [@tomb](https://forum.sierrawireless.com/u/tomb)\
**Post date:** [April 30, 2009, 1:46pm UTC](https://forum.sierrawireless.com/t/unable-to-make-voice-call-from-adl-callsetup/3175/6 "2009-04-30T13:46:08Z")

</div>

Hi Dave, Thanks for answer,

AT commands are working fine, I can make data call and voice call! Send files over XMODEM, etc…

Now I am going to use adl\_callSetup() function and see if this is working as well.  
I will have more question about redirecting data file from GSM to UART1 but I will open new topic for that.

Thanks a lot for help,

Best regards,  
Tom

---

<div class="post-metadata">

**Author:** ![davidc](https://avatars.discourse-cdn.com/v4/letter/d/a183cd/32.png) [@davidc](https://forum.sierrawireless.com/u/davidc)\
**Post date:** [May 1, 2009, 3:30am UTC](https://forum.sierrawireless.com/t/unable-to-make-voice-call-from-adl-callsetup/3175/7 "2009-05-01T03:30:08Z")

</div>

Hiya,

> [@tomb](#):
>
> Thanks for answer,

No Problems. I’d been stuck on this at some stage also.

> [@tomb](#):
>
> AT commands are working fine, I can make data call and voice call! Send files over XMODEM, etc…

Great. Glad that your app is moving forwards.

ciao, Dave

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [May 1, 2009, 5:34am UTC](https://forum.sierrawireless.com/t/unable-to-make-voice-call-from-adl-callsetup/3175/8 "2009-05-01T05:34:14Z")

</div>

> [@davidc](#):
>
> the Wavecom modem tries to make the call over the DATA bearer by default.

This makes sense: the AT command interface on any modem (not just GSM) is basically intended for controlling data calls…

> [@](#):
>
> To force the Wavecom modem to make a call over the VOICE bearer, add a semicolon (😉 to the end of the number in the ATD command.

This is not just Wavecom - it’s standard for GSM

---

<div class="post-metadata">

**Author:** ![tomb](https://avatars.discourse-cdn.com/v4/letter/t/c37758/32.png) [@tomb](https://forum.sierrawireless.com/u/tomb)\
**Post date:** [May 1, 2009, 10:11am UTC](https://forum.sierrawireless.com/t/unable-to-make-voice-call-from-adl-callsetup/3175/9 "2009-05-01T10:11:53Z")

</div>

Hi again,

Thanks for posts. Well, now I have tried to run application with adl\_callSetup(), See below:

```auto
#include "adl_global.h"

/ *************************************************************************** /
/* Mandatory variables */
/*-------------------------------------------------------------------------*/
/* wm_apmCustomStackSize */
/*-------------------------------------------------------------------------*/
/ *************************************************************************** /
const u16 wm_apmCustomStackSize = 1024;
s8 ret_value;
s8 FCMHandler;

bool FcmGSMDataHandler (u16 DataLen, u8 * Data)
{
 
    TRACE (( 1, "Data Event %d", DataLen));
 
    char Buffer[150];
 
    sprintf(Buffer," %u : ",DataLen);
// adl_fcmSendData (FCMHandler,(u8*)&Buffer,(u16)strlen(Buffer));
// adl_fcmSendData (FCMHandler,Data,DataLen);
 
return TRUE;
}

bool FcmCtrlHandler (adl_fcmEvent_e Event)
{
    s8 s8r;
 
    TRACE (( 1, "Ctrl Event %d", Event));
 
    switch (Event)
    {
 
        case ADL_FCM_RET_ERROR_GSM_GPRS_ALREADY_OPENNED :
      {
         TRACE((1, "Flow GSM already Opened"));
         adl_atSendResponse ( ADL_AT_UNS, "ADL_FCM_RET_ERROR_GSM_GPRS_ALREADY_OPENNED\n\r");
         break ;
      }
   case ADL_RET_ERR_PARAM :
      {
         TRACE((1, "ADL_RET_ERR_PARAM"));
         adl_atSendResponse ( ADL_AT_UNS, "ADL_RET_ERR_PARAM\n\r");
         break ;
      }
   case ADL_RET_ERR_ALREADY_SUBSCRIBED :
      {
         TRACE((1, "ADL_RET_ERR_ALREADY_SUBSCRIBED"));
         adl_atSendResponse ( ADL_AT_UNS, "ADL_RET_ERR_ALREADY_SUBSCRIBED\n\r");
         break ;
      }
   case ADL_FCM_EVENT_FLOW_OPENNED :
      {
         TRACE((1, "ADL_FCM_EVENT_FLOW_OPENNED"));
         adl_atSendResponse(ADL_AT_UNS,"GSM Flow openned\r\n");
            ret_value = adl_callSetup("243460**",ADL_CALL_MODE_DATA);
            //adl_fcmSwitchV24State(FCMHandler,ADL_FCM_V24_STATE_DATA);
         TRACE(( 1, "adl_fcmSwitchV24State Ret= %d", s8r)); 
         break ;
      }
   case ADL_FCM_EVENT_FLOW_CLOSED :
      {
        adl_atSendResponse(ADL_AT_UNS,"fcmSubscribe colsed\r\n");
         TRACE((1, "ADL_FCM_EVENT_FLOW_CLOSED"));
         break ;
      }
   case ADL_FCM_EVENT_RESUME :
      {
        adl_atSendResponse(ADL_AT_UNS,"fcmSubscribe resume\r\n");
         TRACE((1, "ADL_FCM_EVENT_RESUME"));
         break ;
      }
   case ADL_FCM_EVENT_MEM_RELEASE :
      {
        adl_atSendResponse(ADL_AT_UNS,"fcmSubscribe release\r\n");
         TRACE((1, "ADL_FCM_EVENT_MEM_RELEASE"));
         break ;
      }
   case ADL_FCM_EVENT_V24_DATA_MODE:
      {
         TRACE((1, "ADL_FCM_EVENT_V24_DATA_MODE"));
         adl_atSendResponse(ADL_AT_UNS,"now be data_mode2\r\n");
         //s8r=adl_fcmSendData(FCMHandler,"abc",3);
         TRACE(( 1, "adl_fcmSendData Ret= %d", s8r)); 
         break ;
      }
   case ADL_FCM_EVENT_V24_AT_MODE:
      {
         TRACE((1, "ADL_FCM_EVENT_V24_AT_MODE"));
         adl_atSendResponse(ADL_AT_UNS,"now be AT mode\r\n");
         break ;
      }
   default :
      {
         adl_atSendResponse(ADL_AT_UNS,"FCM_ControlHandler Event not processed\r\n");
         TRACE((1, "Embedded : FCM_ControlHandler Event not processed"));
         break ;
      }
 
    }
 
return TRUE;
}

s8 MyCallHandler(u16 Event, u32 Call_ID)
{
    switch (Event)
    {
    case ADL_CALL_EVENT_RING_DATA: 
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_RING_DATA\n\r");
           //adl_callAnswer();
      break;
    case ADL_CALL_EVENT_ANSWER_OK:  
        adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_ANSWER_OK\n\r");
    //V24Handle = adl_fcmSubscribe ( USED_FLOW, V24CtrlHandler, V24DataHandler );
      break;
      
    case ADL_CALL_EVENT_RING_VOICE: 
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_RING_VOICE\n\r");
      break;
      
      case ADL_CALL_EVENT_NEW_ID: 
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_NEW_ID\n\r");
           
      break;
      case ADL_CALL_EVENT_RELEASE_ID: 
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_RELEASE_ID\n\r");
           
      break;
      case ADL_CALL_EVENT_ALERTING: 
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_ALERTING\n\r");
           
      break;
      case ADL_CALL_EVENT_NO_CARRIER: 
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_NO_CARRIER\n\r");
      break;
      case ADL_CALL_EVENT_NO_ANSWER: 
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_NO_ANSWER\n\r");
      break;
      case ADL_CALL_EVENT_BUSY: 
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_BUSY\n\r");
      break;
      case ADL_CALL_EVENT_SETUP_OK: 
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_SETUP_OK\n\r");
      break;
      
      case ADL_CALL_EVENT_HANGUP_OK: 
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_HANGUP_OK\n\r");
      break;
      case ADL_CALL_EVENT_SETUP_OK_FROM_EXT: 
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_SETUP_OK_FROM_EXT\n\r");
      break;
      case ADL_CALL_EVENT_ANSWER_OK_FROM_EXT: 
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_ANSWER_OK_FROM_EXT\n\r");
      break;
      case ADL_CALL_EVENT_HANGUP_OK_FROM_EXT: 
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_HANGUP_OK_FROM_EXT\n\r");
      break;
      case ADL_CALL_EVENT_AUDIO_OPENNED: 
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_AUDIO_OPENNED\n\r");
      break;
      case ADL_CALL_EVENT_ANSWER_OK_AUTO: 
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_ANSWER_OK_AUTO\n\r");
      break;
      case ADL_CALL_EVENT_RING_GPRS: 
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_RING_GPRS\n\r");
      break;
      case ADL_CALL_EVENT_SETUP_FROM_EXT: 
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_SETUP_FROM_EXT\n\r");
      break;
 
      case ADL_CALL_EVENT_SETUP_ERROR_NO_SIM: 
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_SETUP_ERROR_NO_SIM\n\r");
      break;
      case ADL_CALL_EVENT_SETUP_ERROR_PIN_NOT_READY: 
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_SETUP_ERROR_PIN_NOT_READY\n\r");
      break;
      case ADL_CALL_EVENT_SETUP_ERROR: 
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_SETUP_ERROR\n\r");
      break;
      case ADL_CALL_EVENT_CIEV: 
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_CIEV\n\r");
      break;
      case ADL_CALL_EVENT_DTR_RELEASE: 
           adl_atSendResponse ( ADL_AT_UNS, "ADL_CALL_EVENT_DTR_RELEASE\n\r");
      break;
      
    }      
}

/ *************************************************************************** /
/* Function : adl_main */
/*-------------------------------------------------------------------------*/
/* Object : Customer application initialisation */
/* */
/*-------------------------------------------------------------------------*/
/* Variable Name |IN |OUT|GLB| Utilisation */
/*--------------------+---+---+---+----------------------------------------*/
/* InitType | | | | Application start mode reason */
/*--------------------+---+---+---+----------------------------------------*/
/ *************************************************************************** /
void adl_main ( adl_InitType_e InitType )
{
    TRACE (( 1, "Embedded : Appli Init" ));
    
    //FCMHandler = adl_fcmSubscribe( ADL_FCM_FLOW_V24_UART1, FcmCtrlHandler , FcmDataHandler);
    FCMHandler = adl_fcmSubscribe( ADL_PORT_GSM_BASE, FcmCtrlHandler , FcmGSMDataHandler);
    //ret_value = adl_callSetup("24346059",ADL_CALL_MODE_DATA);
    
    if (ret_value == OK )
    adl_atSendResponse ( ADL_AT_UNS, "OK, Data phone call has been succeed\32\r\n" );
    else if (ret_value == ADL_RET_ERR_PARAM )
    adl_atSendResponse ( ADL_AT_UNS, "Some errors while calling ADL_RET_ERR_PARAM \32\r\n" );
    else 
    adl_atSendResponse ( ADL_AT_UNS, "ADL_RET_ERR_SERVICE_LOCKED \32\r\n" );
    
    adl_callSubscribe(MyCallHandler); 
    
}
```

And I got ADL\_CALL\_EVENT\_SETUP\_ERROR.

> [@](#):
>
> at+cfun=1  
> OK
> 
> +WIND: 13
> 
> +WIND: 1
> 
> +WIND: 16
> 
> +WIND: 7
> 
> +WIND: 4
> 
> +WIND: 10,“SM”,0,“FD”,0,“ON”,0,“EN”,0
> 
> +WIND: 11,“79434A659D0A9B03B4E6D2AE4C57CA00”,  
> at+wopen=1  
> OK  
> OK, Data phone call has been succeed  
> GSM Flow openned  
> ADL\_CALL\_EVENT\_SETUP\_ERROR

What am I doing wrong? Shall I register to GSM network or subscribe to SIM?  
I have no clue why I cannot call my second terminal. With AT commands I can without any problems.

Thanks in advance for help.  
Tom

---

<div class="post-metadata">

**Author:** ![jan](https://avatars.discourse-cdn.com/v4/letter/j/ce7236/32.png) [@jan](https://forum.sierrawireless.com/u/jan)\
**Post date:** [May 1, 2009, 1:06pm UTC](https://forum.sierrawireless.com/t/unable-to-make-voice-call-from-adl-callsetup/3175/10 "2009-05-01T13:06:42Z")

</div>

It looks like the SIM is registering on its own without the need of supplying a PIN. But it seems to me that you do the call too early. After at+wopen=1 the modem resets and you’ll need to wait until the registration with the network. you could either subscribe to the SIM services or the unsolicited +wind: 10 message, after that you should be able to make the call…

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [May 1, 2009, 3:56pm UTC](https://forum.sierrawireless.com/t/unable-to-make-voice-call-from-adl-callsetup/3175/11 "2009-05-01T15:56:23Z")

</div>

Or wait for +CREG: 2 or 5

---

<div class="post-metadata">

**Author:** ![tomb](https://avatars.discourse-cdn.com/v4/letter/t/c37758/32.png) [@tomb](https://forum.sierrawireless.com/u/tomb)\
**Post date:** [May 1, 2009, 9:36pm UTC](https://forum.sierrawireless.com/t/unable-to-make-voice-call-from-adl-callsetup/3175/12 "2009-05-01T21:36:32Z")

</div>

Thank you Jan for help! I have subscribe for sim events after adl\_sim\_event\_full\_init I call adl\_callSetup() function. It’s working fine!

Cheers,  
Tom

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [May 2, 2009, 1:04am UTC](https://forum.sierrawireless.com/t/unable-to-make-voice-call-from-adl-callsetup/3175/13 "2009-05-02T01:04:40Z")

</div>

> [@tomb](#):
>
> after adl\_sim\_event\_full\_init I call adl\_callSetup() function.

SIM Full Init doesn’t necessarily indicate that you have network registration.

You should really be waiting for network registration before attempting any network operations - including making calls!

---

<div class="post-metadata">

**Author:** ![jan](https://avatars.discourse-cdn.com/v4/letter/j/ce7236/32.png) [@jan](https://forum.sierrawireless.com/u/jan)\
**Post date:** [May 2, 2009, 7:49am UTC](https://forum.sierrawireless.com/t/unable-to-make-voice-call-from-adl-callsetup/3175/14 "2009-05-02T07:49:02Z")

</div>

> [@awneil](#):
>
> > [@tomb](#):
> >
> > after adl\_sim\_event\_full\_init I call adl\_callSetup() function.
> 
> SIM Full Init doesn’t necessarily indicate that you have network registration.
> 
> You should really be waiting for network registration before attempting any network operations - including making calls!

You are absolutely right!! Thanks for the addition, how could I have forgotten that 😊

---

<div class="post-metadata">

**Author:** ![tomb](https://avatars.discourse-cdn.com/v4/letter/t/c37758/32.png) [@tomb](https://forum.sierrawireless.com/u/tomb)\
**Post date:** [May 3, 2009, 2:34pm UTC](https://forum.sierrawireless.com/t/unable-to-make-voice-call-from-adl-callsetup/3175/15 "2009-05-03T14:34:23Z")

</div>

Thanks for update,  
Best regards,  
Tom

---

<div class="post-metadata">

**Author:** ![bandali](https://avatars.discourse-cdn.com/v4/letter/b/e36b37/32.png) [@bandali](https://forum.sierrawireless.com/u/bandali)\
**Post date:** [December 29, 2009, 7:23pm UTC](https://forum.sierrawireless.com/t/unable-to-make-voice-call-from-adl-callsetup/3175/16 "2009-12-29T19:23:13Z")

</div>

Hi there,

I have a related question, is it necessary to subscribe before callSetup? I mean:

adl\_callSubscribe(CALL\_VOICE\_HANDLER);

then

adl\_callSetup(“0912…”, ADL\_CALL\_MODE\_VOICE)

or not? you know, I firstly subscribed the call service, then I used adl\_callSetup, is it correct?

I ask this, because I receive this message: “CALL SETUP ERROR:515”, as you know it means that “wait, init or command set is in progress”, but I really don’t know if this was the cause or not!

any idea?

---

<div class="post-metadata">

**Author:** ![davidc](https://avatars.discourse-cdn.com/v4/letter/d/a183cd/32.png) [@davidc](https://forum.sierrawireless.com/u/davidc)\
**Post date:** [December 31, 2009, 11:51pm UTC](https://forum.sierrawireless.com/t/unable-to-make-voice-call-from-adl-callsetup/3175/17 "2009-12-31T23:51:39Z")

</div>

Hiya,

> [@bandali](#):
>
> I ask this, because I receive this message: “CALL SETUP ERROR:515”, as you know it means that “wait, init or command set is in progress”,

Have you checked that (a) the SIM has finished initializing; &(b) that you have network attachment?

ciao, Dave

---

<div class="post-metadata">

**Author:** ![bandali](https://avatars.discourse-cdn.com/v4/letter/b/e36b37/32.png) [@bandali](https://forum.sierrawireless.com/u/bandali)\
**Post date:** [January 1, 2010, 7:25pm UTC](https://forum.sierrawireless.com/t/unable-to-make-voice-call-from-adl-callsetup/3175/18 "2010-01-01T19:25:05Z")

</div>

it was exactly the problem!

tnx!

---

<div class="post-metadata">

**Author:** ![davidc](https://avatars.discourse-cdn.com/v4/letter/d/a183cd/32.png) [@davidc](https://forum.sierrawireless.com/u/davidc)\
**Post date:** [January 1, 2010, 11:09pm UTC](https://forum.sierrawireless.com/t/unable-to-make-voice-call-from-adl-callsetup/3175/19 "2010-01-01T23:09:12Z")

</div>

Hiya,

> [@bandali](#):
>
> it was exactly the problem!

It’s a common complaint…Always check SIM and network connectivity before attempting network operations…

ciao, Dave