# Transfer programs M1306B to Q2686 - OpenAT V2.10 to 4.00

**URL:** <https://forum.sierrawireless.com/t/transfer-programs-m1306b-to-q2686-openat-v2-10-to-4-00/1430>\
**Category:** Legacy AirPrime modules\
**Created:** [June 28, 2007, 7:48am UTC](https://forum.sierrawireless.com/t/transfer-programs-m1306b-to-q2686-openat-v2-10-to-4-00/1430 "2007-06-28T07:48:31Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![akar](https://avatars.discourse-cdn.com/v4/letter/a/ac8455/32.png) [@akar](https://forum.sierrawireless.com/u/akar)\
**Post date:** [June 28, 2007, 7:48am UTC](https://forum.sierrawireless.com/t/transfer-programs-m1306b-to-q2686-openat-v2-10-to-4-00/1430/1 "2007-06-28T07:48:31Z")

</div>

I developped an Open AT V2.10 application with Cygwin.  
And I downloaded;

1- ftr\_open\_gprs\_both.dwl 204 bytes  
2- ftr\_ip.dwl 193 bytes  
3- eDSoft\_W302\_V210.dwl 116686 bytes  
4- gprsrtd.dwl (my program) 142854 bytes

to M1306B Gprs Modem and it works, perfect.

And then, I bought Wismo Quick Development board  
with Q2686 modules.  
I converted the same application to Open AT V4.00  
with Cygwin and minor differences like below;

ed\_SocketSetConfig( &Socket ); Open AT V2.10  
ed\_SocketSetConfig( ED\_ID\_TCPSOCKET\_1, &Socket ); Open AT V4.00

Now, what files must I download into Q2686 module?

---

<div class="post-metadata">

**Author:** ![tomalex](https://avatars.discourse-cdn.com/v4/letter/t/71e660/32.png) [@tomalex](https://forum.sierrawireless.com/u/tomalex)\
**Post date:** [July 25, 2007, 10:36pm UTC](https://forum.sierrawireless.com/t/transfer-programs-m1306b-to-q2686-openat-v2-10-to-4-00/1430/2 "2007-07-25T22:36:24Z")

</div>

I fear i have to disappoint you. The new internet libary is WIPlib for Q26XX family. However, i know that an alpha version of the Edlib exits for the OAT 4.00 ( as far as i know ) you can give it a try, but i think you should start with OAT 4.21 and use WIPlib instead for several reasons.

Cheers,  
tom