# Timer does not work when restarting

**URL:** <https://forum.sierrawireless.com/t/timer-does-not-work-when-restarting/22256>\
**Category:** Octave\
**Created:** [November 27, 2020, 3:45pm UTC](https://forum.sierrawireless.com/t/timer-does-not-work-when-restarting/22256 "2020-11-27T15:45:23Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![v.babich](https://avatars.discourse-cdn.com/v4/letter/v/e47c2d/32.png) [@v.babich](https://forum.sierrawireless.com/u/v.babich)\
**Post date:** [November 27, 2020, 3:45pm UTC](https://forum.sierrawireless.com/t/timer-does-not-work-when-restarting/22256/1 "2020-11-27T15:45:23Z")

</div>

Hello everybody!

I created a timer with the following configuration:  
`{"modbus_polling": {"autostart": true, "period": 10, "repeat": 5}}`

At the first start, the timer counted from 0 to 5 and stopped (this is OK).  
When I tried to start it again with the “start” or “restart” commands, the timer started counting from 0 to 1 and stopped (and should count to 5).  
I was able to start the timer count to 5 only after reconfiguration. To start the timer again, you need to reconfigure again, otherwise it counts from 0 to 1. The “autostart” field does not affect the result.

Tested on FX30S firmware 3.1.0

---

<div class="post-metadata">

**Author:** ![njoyeux](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/njoyeux/32/6714_2.png) [@njoyeux](https://forum.sierrawireless.com/u/njoyeux)\
**Post date:** [November 27, 2020, 4:22pm UTC](https://forum.sierrawireless.com/t/timer-does-not-work-when-restarting/22256/2 "2020-11-27T16:22:24Z")

</div>

Hello,  
Thanks for reporting this.  
I am also able to reproduce the issue. I apologize for the inconvenience.  
This will be fixed in the next release.  
Regards,  
Nicolas

---

<div class="post-metadata">

**Author:** ![v.babich](https://avatars.discourse-cdn.com/v4/letter/v/e47c2d/32.png) [@v.babich](https://forum.sierrawireless.com/u/v.babich)\
**Post date:** [August 2, 2021, 2:03pm UTC](https://forum.sierrawireless.com/t/timer-does-not-work-when-restarting/22256/3 "2021-08-02T14:03:53Z")

</div>

In version 3.2.0, the problem is fixed!
