# Third UART

**URL:** <https://forum.sierrawireless.com/t/third-uart/1738>\
**Category:** General wireless topics\
**Created:** [November 22, 2007, 3:35pm UTC](https://forum.sierrawireless.com/t/third-uart/1738 "2007-11-22T15:35:40Z")\
**Posts on this page:** 14\
**Page:** 1

<div class="post-metadata">

**Author:** ![ToF](https://avatars.discourse-cdn.com/v4/letter/t/db5fbb/32.png) [@ToF](https://forum.sierrawireless.com/u/ToF)\
**Post date:** [November 22, 2007, 3:35pm UTC](https://forum.sierrawireless.com/t/third-uart/1738/1 "2007-11-22T15:35:40Z")

</div>

Hi,

Is someone already succeed in simulating a UART TX line on a GPIO ?

What’s your feeling in trying such development with OpenAT

Thanks,

---

<div class="post-metadata">

**Author:** ![tobias](https://avatars.discourse-cdn.com/v4/letter/t/c67d28/32.png) [@tobias](https://forum.sierrawireless.com/u/tobias)\
**Post date:** [November 23, 2007, 7:28am UTC](https://forum.sierrawireless.com/t/third-uart/1738/2 "2007-11-23T07:28:34Z")

</div>

Maybe with extremely slow speed, but it’s really not worth trying.  
On Q2686 you have USB, and if you can’t use USB, it’s better to use an USB host to serial chip like those offered by [vinculum.com/](http://vinculum.com/)

Or you go for a SPI or I2C to serial converter if you think that’s better.

Another option is to use the multiplexing capabilities of the UARTs so you can use 4 virtual UARTs on a single physical.

Or if the communication is not needed all the time, you can add a physical multiplexer that you can use to switch between the targets and only use a single UART on the Wavecom module.

---

<div class="post-metadata">

**Author:** ![ToF](https://avatars.discourse-cdn.com/v4/letter/t/db5fbb/32.png) [@ToF](https://forum.sierrawireless.com/u/ToF)\
**Post date:** [November 23, 2007, 12:49pm UTC](https://forum.sierrawireless.com/t/third-uart/1738/3 "2007-11-23T12:49:49Z")

</div>

Thanks Tobias, not exactly what i’m looking for, but interresting !

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [November 23, 2007, 12:57pm UTC](https://forum.sierrawireless.com/t/third-uart/1738/4 "2007-11-23T12:57:22Z")

</div>

Perhaps if you explained exactly what you are looking for, then people might be able to make better suggestions… ❓

What is your actual requirement?

---

<div class="post-metadata">

**Author:** ![ToF](https://avatars.discourse-cdn.com/v4/letter/t/db5fbb/32.png) [@ToF](https://forum.sierrawireless.com/u/ToF)\
**Post date:** [November 23, 2007, 1:41pm UTC](https://forum.sierrawireless.com/t/third-uart/1738/5 "2007-11-23T13:41:22Z")

</div>

OK… sorry…

Just looking to simulate a TX pin (like a TX on UART) to transmit data at a rate of 9600 bps. Only that pin is necessary. So, for you, what should be the right way to get such behaviour. Using a GPIO ? or something else…

---

<div class="post-metadata">

**Author:** ![tobias](https://avatars.discourse-cdn.com/v4/letter/t/c67d28/32.png) [@tobias](https://forum.sierrawireless.com/u/tobias)\
**Post date:** [November 23, 2007, 6:43pm UTC](https://forum.sierrawireless.com/t/third-uart/1738/6 "2007-11-23T18:43:58Z")

</div>

Is there any reason why you can’t use the UART options that are already there?

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [November 23, 2007, 8:49pm UTC](https://forum.sierrawireless.com/t/third-uart/1738/7 "2007-11-23T20:49:00Z")

</div>

> [@ToF](#):
>
> Just looking to simulate a TX pin (like a TX on UART)

That’s not really what I meant.

Why do you need to do this?

You’re suggesting a solution - but what is the actual problem?  
What are you trying to achieve?

---

<div class="post-metadata">

**Author:** ![ToF](https://avatars.discourse-cdn.com/v4/letter/t/db5fbb/32.png) [@ToF](https://forum.sierrawireless.com/u/ToF)\
**Post date:** [November 26, 2007, 8:08am UTC](https://forum.sierrawireless.com/t/third-uart/1738/8 "2007-11-26T08:08:45Z")

</div>

Guys,

Thanks for your enthusiasm answers.

Yes, there is a good reason! The 2 others are already used by the design itself, around my wireless CPU. As there is a third element on my platform, i need it. But, on this latest element, i just need to transmit data to it. So, i was looking to a simple way to send the data stream. But it seems, that it is not as trivial as i thought ☹

Anyway, as i have few available I/O, i primary prefer to use some of those pins rather than using some kind of switch for the TX pin of the UART.

May that was not a great idea 😉

---

<div class="post-metadata">

**Author:** ![tomalex](https://avatars.discourse-cdn.com/v4/letter/t/71e660/32.png) [@tomalex](https://forum.sierrawireless.com/u/tomalex)\
**Post date:** [November 26, 2007, 5:06pm UTC](https://forum.sierrawireless.com/t/third-uart/1738/9 "2007-11-26T17:06:35Z")

</div>

Hi,

Maybe multiplexing with Xilinx CPLD? Cheap (few dollars) and fast little monsters, and you can program and manage your connections and change it whenever or whatever you want! You can solve your issue with that.  
Worth considering in every complex design!

Best Regards,

tom

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [November 26, 2007, 6:28pm UTC](https://forum.sierrawireless.com/t/third-uart/1738/10 "2007-11-26T18:28:05Z")

</div>

> [@tomalex](#):
>
> Maybe multiplexing with Xilinx CPLD?

Which is exactly what this device does, as it happens:

[bb-europe.com/product\_family … b&Trail=93](http://www.bb-europe.com/product_family.asp?FamilyId=32&TrailType=Sub&Trail=93)

---

<div class="post-metadata">

**Author:** ![ToF](https://avatars.discourse-cdn.com/v4/letter/t/db5fbb/32.png) [@ToF](https://forum.sierrawireless.com/u/ToF)\
**Post date:** [December 6, 2007, 1:39pm UTC](https://forum.sierrawireless.com/t/third-uart/1738/11 "2007-12-06T13:39:24Z")

</div>

> [@tomalex](#):
>
> Xilinx CPLD

Hum… not possible, but thanks for the idea… i’m afraid of the power consumption of such chip !

Don’t worry… i’ll find an other way…

---

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [December 6, 2007, 3:36pm UTC](https://forum.sierrawireless.com/t/third-uart/1738/12 "2007-12-06T15:36:30Z")

</div>

> [@ToF](#):
>
> i’m afraid of the power consumption of such chip !

They don’t call them “Cool-Runner” for nothing, you know… 😉

> [@Xilinx](#):
>
> The CoolRunner™ Series of Xilinx CPLDs feature the lowest-power, highest-performance devices in the industry.  
> [xilinx.com/products/silicon\_ … /index.htm](http://www.xilinx.com/products/silicon_solutions/cplds/coolrunner_series/index.htm)

You wouldn’t need a big powerful device just to do this…

---

<div class="post-metadata">

**Author:** ![tomalex](https://avatars.discourse-cdn.com/v4/letter/t/71e660/32.png) [@tomalex](https://forum.sierrawireless.com/u/tomalex)\
**Post date:** [December 6, 2007, 10:56pm UTC](https://forum.sierrawireless.com/t/third-uart/1738/13 "2007-12-06T22:56:00Z")

</div>

> [@](#):
>
> 'm afraid of the power consumption of such chip !

Don’t worry it won’t heat up the room! 🙂

> [@](#):
>
> Don’t worry… i’ll find an other way…

Just don’t forget to post it! 😉

Cheers,  
tom

---

<div class="post-metadata">

**Author:** ![ToF](https://avatars.discourse-cdn.com/v4/letter/t/db5fbb/32.png) [@ToF](https://forum.sierrawireless.com/u/ToF)\
**Post date:** [December 7, 2007, 7:28am UTC](https://forum.sierrawireless.com/t/third-uart/1738/14 "2007-12-07T07:28:31Z")

</div>

Anyway, thank you guys !
