# The configuration support is not installed on the system

**URL:** <https://forum.sierrawireless.com/t/the-configuration-support-is-not-installed-on-the-system/5722>\
**Category:** Development tools\
**Created:** [July 13, 2012, 1:21am UTC](https://forum.sierrawireless.com/t/the-configuration-support-is-not-installed-on-the-system/5722 "2012-07-13T01:21:46Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![pvouzis](https://avatars.discourse-cdn.com/v4/letter/p/50afbb/32.png) [@pvouzis](https://forum.sierrawireless.com/u/pvouzis)\
**Post date:** [July 13, 2012, 1:21am UTC](https://forum.sierrawireless.com/t/the-configuration-support-is-not-installed-on-the-system/5722/1 "2012-07-13T01:21:46Z")

</div>

When I go to project-\> properties -\> C/C++ Build and in configuration I choose [Target]\_ARM\_EABI\_GCC\_Debug I get the message “The configuration support is not installed on the system” underneath it. I am not sure why this comes up. Does anybody knows what might be wrong or what I might be missing?

Thanks!

---

<div class="post-metadata">

**Author:** ![daav](https://sea1.discourse-cdn.com/flex025/user_avatar/forum.sierrawireless.com/daav/32/2767_2.png) [@daav](https://forum.sierrawireless.com/u/daav)\
**Post date:** [July 17, 2012, 8:58am UTC](https://forum.sierrawireless.com/t/the-configuration-support-is-not-installed-on-the-system/5722/2 "2012-07-17T08:58:12Z")

</div>

Did you installed the ARM EABI GCC toolchain with DS?  
If not, you can install it by following the instructions in online help at Developer Studio User Guide \> Getting Started \> Software Updates