# test command set

**URL:** <https://forum.sierrawireless.com/t/test-command-set/7342>\
**Category:** Legacy HL Series\
**Created:** [July 25, 2014, 3:50pm UTC](https://forum.sierrawireless.com/t/test-command-set/7342 "2014-07-25T15:50:32Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![HUGWI](https://avatars.discourse-cdn.com/v4/letter/h/a5b964/32.png) [@HUGWI](https://forum.sierrawireless.com/u/HUGWI)\
**Post date:** [July 25, 2014, 3:50pm UTC](https://forum.sierrawireless.com/t/test-command-set/7342/1 "2014-07-25T15:50:32Z")

</div>

Hi,  
is a test command set for HL6528 aviable or planned?  
our goal is to test the RF-parameters using the communication test set 4202S(no GPRS Test installed).  
For example: a permanently burst sent from module to tester should be generated.

kind regards,  
Franz

---

<div class="post-metadata">

**Author:** ![lotam](https://avatars.discourse-cdn.com/v4/letter/l/958977/32.png) [@lotam](https://forum.sierrawireless.com/u/lotam)\
**Post date:** [July 28, 2014, 5:12am UTC](https://forum.sierrawireless.com/t/test-command-set/7342/2 "2014-07-28T05:12:00Z")

</div>

Hi Franz,

+WMTXPOWER should meet your requirement.  
Please refer to HL6 AT cmd guide, section 19 Test commands, +WMTXPOWER for more info.

[http://developer.sierrawireless.com/Resources/Resources/AirPrime/Software/AirPrime\_HL6\_and\_HL8\_Series\_AT\_Commands\_Interface\_Guide.aspx](http://developer.sierrawireless.com/Resources/Resources/AirPrime/Software/AirPrime_HL6_and_HL8_Series_AT_Commands_Interface_Guide.aspx)

Hope this helps.  
Thx