# Target Management: Re-attach Console view?

**URL:** <https://forum.sierrawireless.com/t/target-management-re-attach-console-view/4814>\
**Category:** Development tools\
**Created:** [January 7, 2011, 3:16pm UTC](https://forum.sierrawireless.com/t/target-management-re-attach-console-view/4814 "2011-01-07T15:16:07Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [January 7, 2011, 3:16pm UTC](https://forum.sierrawireless.com/t/target-management-re-attach-console-view/4814/1 "2011-01-07T15:16:07Z")

</div>

Originally, the Target (AT Commands) console view appeared as a pane below the Traces.

I “Detached” it, so that I could drag it to a separate monitor.

That worked fine but, when I uncheck ‘Detached’, it becomes a whole separate Tab - I can’t get it back to its original position at the bottom of the traces!

How do I get it back as it was❓

---

<div class="post-metadata">

**Author:** ![cory\_johannsen](https://avatars.discourse-cdn.com/v4/letter/c/a9a28c/32.png) [@cory\_johannsen](https://forum.sierrawireless.com/u/cory_johannsen)\
**Post date:** [January 7, 2011, 4:00pm UTC](https://forum.sierrawireless.com/t/target-management-re-attach-console-view/4814/2 "2011-01-07T16:00:19Z")

</div>

You should be able to drag the Tab header itself into the position that you want. If you let it hover for a few seconds over a part of the screen, Eclipse will show you the docking possibilities. This works for all views in Eclipse actually.