# SSL socket support on HL6528

**URL:** <https://forum.sierrawireless.com/t/ssl-socket-support-on-hl6528/8512>\
**Category:** Legacy HL Series\
**Created:** [April 18, 2016, 9:44am UTC](https://forum.sierrawireless.com/t/ssl-socket-support-on-hl6528/8512 "2016-04-18T09:44:11Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![bazzer](https://avatars.discourse-cdn.com/v4/letter/b/67e7ee/32.png) [@bazzer](https://forum.sierrawireless.com/u/bazzer)\
**Post date:** [April 18, 2016, 9:44am UTC](https://forum.sierrawireless.com/t/ssl-socket-support-on-hl6528/8512/1 "2016-04-18T09:44:11Z")

</div>

Hi

Does the HL6528 support SSL TCP sockets ? I can see its supports HTTPS but does it allow for a propitiatory protocol over a standard SSL TCP socket.

Thanks

Barry

---

<div class="post-metadata">

**Author:** ![Rex\_alex](https://avatars.discourse-cdn.com/v4/letter/r/73ab20/32.png) [@Rex\_alex](https://forum.sierrawireless.com/u/Rex_alex)\
**Post date:** [April 20, 2016, 8:42am UTC](https://forum.sierrawireless.com/t/ssl-socket-support-on-hl6528/8512/2 "2016-04-20T08:42:06Z")

</div>

normal case HTTP runs over TCP. So we can say it supports SSL TCP packets…  
You can have a try 😉

-Alex

---

<div class="post-metadata">

**Author:** ![bazzer](https://avatars.discourse-cdn.com/v4/letter/b/67e7ee/32.png) [@bazzer](https://forum.sierrawireless.com/u/bazzer)\
**Post date:** [April 20, 2016, 10:59am UTC](https://forum.sierrawireless.com/t/ssl-socket-support-on-hl6528/8512/3 "2016-04-20T10:59:58Z")

</div>

Hi Alex

I can’t see any way in the AT command set up open up a socket and use SSL ?

Or are you saying open a http connection and send non HTTP stuff down that ?

Cheers

Barry

---

<div class="post-metadata">

**Author:** ![Rex\_alex](https://avatars.discourse-cdn.com/v4/letter/r/73ab20/32.png) [@Rex\_alex](https://forum.sierrawireless.com/u/Rex_alex)\
**Post date:** [May 18, 2016, 9:28am UTC](https://forum.sierrawireless.com/t/ssl-socket-support-on-hl6528/8512/4 "2016-05-18T09:28:15Z")

</div>

Hi,  
Sorry for delay in response,  
Even I have gone through the AT command guide, didn’t find any command to use SSL on TCP socket ☹

-Alex