# SPI "External Storage" sample - IRQs not working?

**URL:** <https://forum.sierrawireless.com/t/spi-external-storage-sample-irqs-not-working/3208>\
**Category:** Open AT\
**Created:** [May 8, 2009, 9:31am UTC](https://forum.sierrawireless.com/t/spi-external-storage-sample-irqs-not-working/3208 "2009-05-08T09:31:42Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.sierrawireless.com/u/awneil)\
**Post date:** [September 17, 2009, 8:30am UTC](https://forum.sierrawireless.com/t/spi-external-storage-sample-irqs-not-working/3208/3 "2009-09-17T08:30:16Z")

</div>

Sorry, I forgot to update this with the “solution”! 😊

Everything was actually working fine: the “trick” is just the fact that the IRQ Traces come on different “flows” to the main application - so I just needed to enable those “flows” in the TMT (or M2MStudio Target view)

The “flows” are:  
ADL - for the main application - as usual;  
LLH - for the Low-Level Handler;  
HLH - for the High-Level handler.

See the description of adl\_trcPrint in the ADL User Guide.

---

_[View the full topic](https://forum.sierrawireless.com/t/spi-external-storage-sample-irqs-not-working/3208)._
